User's Manual

AUDIO
Enabling or disabling Audio
Mini can be configured to process embedded audio from
SDI or HDMI from within the web configuration console.
This setting is located in the Video section of the console
and operates in the following way:
Audio Mute ON
Audio is not passed through embedded SDI or HDMI.
Audio Mute OFF
Audio is passed through the embedded SDI or HDMI input
and streamed to the NDI receiver.
Current video input:
Audiosetup:
Mute:
Tally:
Input selection:
AUTO/SDI/1080i/25.0/YUV
DASHBOARD NETWORK VIDEO CONFIG. SYSTEM LOGOUT
MINI
8
NDI DECODE OPERATION
Changing modes from NDI Encoder to NDI Decoder
BirdDog can operate in either NDI Encode (converting from
HDMI to NDI) or NDI Decode (receiving an NDI signal from
the network and displaying it out the HDMI ports).
To change modes from the default NDI Encoder mode into
NDI Decode navigate to the CONFIG. section of the web
interface.
Select DECODE mode from the selection box and press
REBOOT DEVICE.
Note that you must reboot the BirdDog unit once a new
operating mode is selected, dynamically switching will be
added in an upcoming firmware release.
CURRENT OPERATION MODE
(Change requires reboot)
Current Source
Available Sources
APPLY
DECODE ENCODE
REBOOT DEVICE
DESKTOP-EVS0MMN
DESKTOP-EVS0MM
DASHBOARD NETWORK VIDEO CONFIG. SYSTEM LOGOUT
MINI