Instruction Manual

Description of wiring

Installation instructions

1. Turn off the car engine

2. The TF card is correctly inserted into the recorder card slot.

[note] please use high-speed TF Card (above Class6), capacity is

not less than 2MB, TF card maximum support 32GB.

3. Connect yellow power line to 12V power supply, red ACC

ignition control line, black grounding, yellow joint video AV

output to AVI input interface of navigation. Start the engine,

check that the machine is installed correctly, the LED indicator

lights up and blinks, and the machine starts to enter the video

recording state.

Introduction of key function

Reset hole

Indicator light

photographing /

Power /

confirmation

Micropho