User's Manual

3.11 User Programmable Options Buttons Ⅲ + Ⅳ 2 sec
When you enter programming mode by holding Buttons III + Ⅳ for 2 seconds, you
will hear 1 remote control beep. The parking lights will flash 1 time and the siren
will chirp 1 time. You are now in programming mode. Follow the chart below for
programming options.
For example, to select 5 minutes for Remote Start Run Time, hold Buttons
III + Ⅳ
for 2 seconds. You will hear 1 remote control beep, see 1 parking light flash, and
hear 1 siren chirp. Within 5 seconds, press Button
IV. You will hear 1 remote
control beep to signify the first button press. Press Button
I to enter the Remote
Start Run Time menu. You will hear 2 remote control beeps to signify the second
button press. Now, press Button Ⅱ to select 5 minutes. You will hear 3 remote
control beeps to signify the third button press. You will also hear 1 chirp and see 1
parking light flash.
User Option
Options
Ⅰ Ⅱ Ⅲ
Remote Start Run Time
Ⅳ → Ⅰ
15 min 5 min 25 min
Diesel Warm Up Time
Ⅳ → Ⅱ
30 sec 15 sec 7.5 sec
Siren Sound Time
Ⅳ → Ⅲ
30 sec 70 sec 100 sec
Turbo Timer Run Time
Ⅳ → Ⅳ
1 min 2 min 5 min
Remote Start Reservation
Ⅲ → Ⅳ
Automatic Manual
Cold Start Timer
Ⅲ → Ⅲ
1 hour 2 hours 3 hours
Button
Sequence
Shock Sensor ON/OFF
Ⅲ → Ⅱ
ON OFF
Temperature Unit
Ⅲ →Ⅰ
Fahrenheit Celsius
Default values.
21