User's Manual

area. Do not idle the vehicle if any laws prohibit this action. Do not idle
the vehicle if it is a convertible or open concept type of vehicle.
3.8 Option 1 Input
Additional sensors can be added to the system using Option 1 input. No additional
programming is required. When the sensor is triggered, the parking lights will flash
and the siren will sound.
3.9 Remote Control Registration
1. Insert key and turn the key to ON position (engine is OFF).
2. Press brake pedal 4 times.
3. On the 4th press, hold the brake pedal down.
4. 3 parking light flashes and 3 siren chirps will confirm
remote control programming mode.
5. Press Button Ⅰ (Lock Button) .
6. After each remote control is added, there will be a
confirmation of 2 parking
light flashes and 2 siren chirps. You can add up to 3 2-way remote controls
and 2 1-way remote controls per system.
7. Once the key is turned to the OFF position or 10 seconds without adding a
remote control passes, the system will exit remote control programming
mode.
※ Each time a remote control is added, all remote
controls must be
reprogrammed to the system. Adding a remote control
erases
previously stored remote controls from the system.
3.10 Remote Start Reservation
Manual transmission vehicles require remote start reservation in order to
ensure that the vehicle is properly prepared for remote start. There are 2
22