User's Manual

remote start
reservation modes: automatic and manual. Please note that automatic and
manual do not refer to the transmission type. Rather, automatic and manual refer
to the type of remote start reservation.
1. Automatic Remote Start Reservation (Default)
a. Before turning off the engine, put the transmission into Neutral. Ensure that
the parking brake (emergency brake) is engaged. Take foot off of the foot brake.
b. Turn the key to the OFF position. The engine should still be running.
c. Exit the vehicle within 2 minutes.
d. Once the last door is closed, the engine will turn off.
e. Arm the system. Remote start is ready to be used.
2. Manual Remote Start Reservation
a. Before turning off the engine, put the transmission into Neutral. Ensure that
the parking brake (emergency brake) is engaged. Take foot off the foot brake.
b. Press Button Ⅲ for 2 seconds.
c. Turn the key to the OFF position. The engine should still be running.
d. Exit the vehicle within 2 minutes.
e. Once the last door is closed, the engine will turn off.
f. Arm the system. Remote start is ready to be used.
NOTE1: Remote start reservation type can be changed through the User
Programmable Options.
NOTE2: If a door, trunk, or hood is opened, remote start reservation will be cancelled
and remote start will not be available.
3.11 User Programmable Options Buttons Ⅲ + Ⅳ 2 sec
When you enter programming mode by holding Buttons III + Ⅳ for 2 seconds, you
will hear
1 remote
control
beep.
The
parking
lights will
flash 1
time and the siren
will chirp 1 time. You are now in programming mode. Follow the chart below for
programming options.
23
Warning shock sensitivity adjustment
Full shock sensitivity adjustment
Green LED indicator for warning shock
Red LED indicator for full shock