User's Manual

ButtonⅡ : Hours setting.
Press and/or hold Button II in order to increase the hours value.
Button Ⅲ : Minutes setting.
Press and/or hold Button III in order to increase the minutes value.
Button Ⅳ: Confirmation or rejection.
Press and hold Button IV for 2 seconds in order to accept the desired
time or press for 0.5 second in order to reject the set time.
NOTE : If a button is not pressed within 20 seconds of another press,
programming mode will be exited.
1. Time - Clock Feature Displaying Current Time
a. Press and hold Button Ⅱ for 4 seconds. The time will begin to blink.
b. Press ButtonⅡ and Button Ⅲ in order to adjust the hours and
minutes.
c. Press and hold Button Ⅳ for 2 seconds in order to confirm the set
time.
2. Alarm - Alarm Clock Feature
a. Press and hold Button Ⅱ for 4 seconds. The time will begin to blink.
b. Press Button I for 0.5 second to toggle to Alarm setting.
c. Press ButtonⅡ and Button Ⅲ in order to adjust the hours and
minutes.
d. Press and hold Button Ⅳ for 2 seconds in order to confirm the set
time.
e. The icon will appear.
3. Remote Start Timer Set - Remote Start will occur at the specified time if
all
constraints on remote start are met. Remote Start will occur each day at
the
specified time until the feature is turned OFF.
a. Press and hold Button Ⅱ for 4 seconds. The time will begin to blink.
b. Press Button I twice for 0.5 second each to toggle to Remote Start
Timer setting.
c. Press ButtonⅡ and Button Ⅲ in order to adjust the hours and
minutes.
d. Press and hold Button Ⅳ for 2 seconds in order to confirm the set
time.
e. The icon will appear.
3.13 Aux 1 Output Buttons Ⅰ + Ⅱ 0.5 sec
Aux 1 output can be used to control other devices such as window modules for
rolling up or rolling down windows. Press Buttons Ⅲ + Ⅳ for 0.5 second to
activate Aux 1
output. 2 parking light flashes and 2 siren chirps will confirm output. The remote
control will blink 2 times and beep 2 times.
26
WARRANTY CARD
Use this warranty card for your records. Please go to
www.zenesisalarms.com
Visit the link above for specific warranty terms and conditions.
ITU emission Code
8K50F1D
Oscillation Type
X-TAL
Modulation Type
FSK (Frequency shift keying)
Data Rate (Mbps)
1200 bps
Operated Frequency
433.920 ㎒
Channel Number
One Channel
Communication Type
Simplex(Two-way)
Operation temperature
(-) 40℃ ~ (+) 80 ℃
Remote Controller:
- 250 g / 66 (L) ㎜ x 30 (W) ㎜ x 15 (D) ㎜
Main Controller:
140 (L) ㎜ x 95 (W) ㎜ x 30 (D) ㎜
Power Source
Remote Controller:
1.5 Vdc (Alkaline battery), Size: AAA
Main controller:: 12Vdc (Use the Car Adaptor)
Weight / Dimension