User's Manual

Keyfree RF manual Ver. 2.1
We sincerely appreciate your purchasing our Digital card key system. Our systems
have been designed and tested to be compatible with the earliest to latest vehicles
available throughout the world. Our primary goal is to provide a reliable and stable
product. Our secondary goal is to ensure that our systems are easy to install. Our
final goal is to provide features that would benefit the user and installer. We are
confident that our products will meet and exceed your expectations. We are
constantly working to research, design, and build next generation products. We
would not expect anything less since we ourselves use our products in our own
vehicles.
Safety Information
Please take these safety precautions.
1. We are not responsible for any injuries or damages resulting from your wrong use of our system.
2. When you find any detective, do not open, repair and remodel the system, but ask the seller or
installer to repair it.
3. We shall not be responsible for any theft and damages of your vehicle, since this is only a
subsidiary car accessory.
4. This product scheme is minus signal control type. Plus signal control or vehicles without remote
controller must be installed with additional relay and door motor.
6. To improve the performance, this product is subject to change without notice.
Components
Main unit Main Holder Harnesses manual RF card / RF tag and
double sided tape
• Main unit: A device that controls the various functions and commands
• Main Holder: To support the Main unit, fixed to the floor with double sided tape.
• Harnesses: This wires supply the power and door signal.
• Registered RF card 1, RF tag type 1.
• Double sided tape for RF tag to adhere to the back of mobile phone.
Available RF card
• Offered cards and NFC chip embedded in mobile phone are available.
• Can register the RF card up to seven.