User's Manual

Keyfree RF manual Ver. 2.1
Unlk: Programming of
Unlock Pulses
(Default: 1)
1. Press E button for 2 seconds (setting menu entry)
2. D button pressed, the menu changed. Select the “Unlk” and press the E
button to confirm.
3. Select the Un 1, Un 2, Un 3, Un 4, Un 5 with D button and press 2
seconds with E button to end.
4. Display the “donE” and complete.
FbLk: Lock and Unlock
signal feedback
(Default: OFF)
1. Press E button for 2 seconds (setting menu entry)
2. D button pressed, the menu changed. Select the “Fblk” and press the E
button to confirm.
3. Select the ON, OFF with D button and press 2 second with E button to
end.
4. Display the “donE” and complete.
* Display the “OPEN”, “CLSE” automatically: Select “OFF”
* Cannot receive the output signal due to the electrical noise: Select “OFF”
Warranty
1. The products are warranted for 1 year.
2. Following the service will receive a fee
1) If the warranty period has been exceeded
2) Failure due to carelessness of the consumer, random repair etc.
3) Failures caused by natural disasters
4) Failures caused by manual and notice negligence.