BigGreen Commercial™ BGCOMP9H USER'S GUIDE 2 Thank You 3 Safety Instructions 4 Product View 5 Assembly 6 Operations 7-8 9 Maintenance and Care Troubleshooting 10 Replacement Parts 11 Warranty 12 Customer Service
Thanks for buying a BISSELL Commercial Canister Vacuum Thanks for buying a BISSELL Commercial Canister Vacuum BGCOMP9H. We’re glad you purchased a BISSELL Commercial Canister Vacuum BGCOMP9H. Everything we know about floor care went into the design and construction of this complete, high-tech commercial cleaning system. Your BISSELL Commercial Canister Vacuum BGCOMP9H is well made, and we back it with a limited one year warranty.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: ■ Do not pick up hard or sharp objects such as glass, nails, Read all instructions before using your Commercial UPRIGHT VACUUM-BG 78. ■ Do not pick up anything that is burning or smoking, such as Always connect to a polarized outlet (left slot is wider than right). Unplug from outlet when not in use and before conducting maintenance.
Product view Cord Wrap Cord On/Off Switch Telescoping Wand Suction Power Switch Brush Control Hose Combo Floor Tool 4 www.bissellcommercial.com 855.544.
Assembly 1. Unlock the vacuum cover from the base of the vacuum to confirm a bag is in place. 2. To insert a new bag: Open the bag and make sure to pull on the sides of the bag to “puff” it up. 3. Slide the cardboard tag on the bag into the slots within the canister until bag is secure. 4. Insert the end of the hose into the vacuum intake and turn it clockwise to secure the hose. ATTENTION: Some Berber carpets have a tendency to fuzz with wear.
Operations Operating instructions 1. Confirm that a bag is properly installed in the vacuum. Reference #2-#3 in the Assembly section to insert a new bag. 2. Locate the accessory you would like to use and attach to the end of the hose or the end of the extension if you choose to attach this as well. 3. To make the vacuum stable ( so it doesn’t roll on its wheels), tip the unit on its side so it rests on the cord wrap.
Maintenance and care Removing and Replacing Dirt Bag 1. Unlock the vacuum cover from the base of the vacuum. 2. Remove the hose from the intake of the vacuum. 3. Take the sides of the vacuum bag and fold the ends together. Pull on the cardboard tag which will seal the bag. WARNING: To reduce the risk of fire, electric shock, or injury,turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. 4.
Maintenance and care How to replace the Exhaust Filter 1. Unlock the filter lock by rotating the yellow knob located near the cord wrap. 1. 2. Pull on the black exhaust filter to remove. 3. Replace by sliding a new filter cartridge in and lock by rotating the yellow knob. How to Replace or Clean the Motor Filter 1. Open the canister by unlocking the vacuum cover to expose the inside of the vacuum. 2. To clean filter slide off the permanent motor filter and vacuum filter off with a different vacuum. 2.
Troubleshooting Low Suction Possible causes WARNING: To reduce the risk of fire, electric shock, or injury,turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. Remedies 1. Dust Bag is Full 1. Replace Dust Bag 2. Wand is not installed properly 2. Secure the wand properly to ensure no air leaks Poor Pick Up Possible causes Remedies 1. Brush not adjusted to the proper height 1.
Replacement parts Item 1. 2. 3. 4. 5. 6. 7. 8 8 Part No. Part Name 203-7858 Disposable Paper Bag 203-7859 Combo Floor Tool 203-7860 Upholstery Tool 203-7861 Crevice Tool 203-7862 Dusting Brush 203-7863 Telescoping Wand 203-7864 Vacuum Hose Assembly 203-7867 Pre-Motor Filter 203-7868 Post Motor Filter For a complete list of replacement parts for your BISSELL Commercial canister vacuum please visit www.bissellcommercial.com or contact BISSELL Customer Service at 1.855.544.7336. 10 www.
Warranty - BISSELL Commercial Canister Vacuum This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Customer Service by E-mail, telephone, or regular mail as described below.
BISSELL customer Service For information about repairs or replacement parts, or questions about your warranty, call: BISSELL Customer Service 1-855-544-7336 Monday - Friday 8 a.m. — 5 p.m. ET Or write: BISSELL Business Ventures, LLC. PO Box 3606 Grand Rapids MI 49501 ATTN: Customer Service Or visit the BISSELL website - www.bissellcommercial.com When contacting BISSELL, have model number of cleaner available.
