USER'S GUIDE 1005-E SERIES 220-240V 2 Thank You 3 Safety Instructions 4- Product View 5 Assembly 6 Special Features Includes 6-8 9 Operations Maintenance and Care 10 Troubleshooting 10 Replacement Parts 10 Additional Accessories 11 Warranty 12 Consumer Care 2 Microfibre Mop Pads with Microban™ Antibacterial Protection
Thanks for buying a BISSELL Steam Mop™ We’re glad you purchased a BISSELL Steam Mop. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your BISSELL Steam Mop is well made, and we back it with a limited one year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Care department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: ■ Not intended for use by persons (includ- Read all instructions before using Steam mop. Always connect to a properly Earthed outlet. Unplug from outlet when not in use and before conducting maintenance or troubleshooting.
Product view Includes 2 Microfibre Mop Pads with Microban™ Antibacterial Protection Strain Reliever Handle™ Quick Release™ Cord Wrap Power Cord Bacteria Build-Up on Non-Microban (left) vs. Microban Mop Pad (right) Lower Cord Wrap Steam on Demand Trigger Carrying Handle Removable Water Tank Water Filter In between uses, bacteria can quickly multiply in number on an unprotected steam mop pad. Microban® antibacterial protection helps prevent the growth of 99.9% of harmful bacteria on the pad surface.
Assembly Handle Assembly Your Steam Mop assembles quickly and easily. The only thing you will need for assembly is a Phillips head screwdriver. Your Steam Mop is packaged with the following items: Handle Assembly Lower Body with Water Filter Manoeuvrable Swivel Head Removable Water Tank 1 large Phillips Head Screw taped to the handle 1 small Phillips Head Screw taped to the handle 2 Microfibre Mop Pads Large Screw Lower Body Small Screw Manoeuvrable Swivel Head 1.
Special features Removable water tank The water tank is located on the back of the Steam Mop. It can be refilled with water any time during use. Distilled or demineralized water may be used in place of tap water. Do not use chemicals with your Steam Mop. Water filter This filter removes minerals and other impurities from tap water, preventing water deposits from damaging your Steam Mop. It should be replaced when the bright green grains turn blue.
Operations Getting ready continued 2. Fill the water tank by lifting straight up and away from unit. Unscrew cap at bottom of water tank and remove the insert assembly. 3. Fill water tank with water. For best results, water should be at room temperature. Replace insert assembly and cap, tighten until snug. 4. Replace water tank by lining up vertical guides and gently sliding tank into place. 2A 2B 2E 5.
Operations Cleaning hard floors continued Important: Sanitising on timber floors is not recommended as prolonged application of steam in one area increases the risk of damage to the surface treatment on timber floors, especially in areas with regular foot traffic and direct sunlight, which will wear down timber floor surface treatments making it more susceptible to steam damage. See CAUTION on page 7. 3. When the Steam Mop stops emitting steam, turn the unit off and unplug it.
Maintenance and care When you're done 1. Unplug power cord from outlet. 2. Carefully remove mop pad from swivel head, as mop pad and lower assembly will be hot. 3. Any water remaining in the water tank should be emptied prior to machine storage. 4. Mop pad can be machine washed in warm water. Use only liquid detergants. Do not use bleach or fabric softeners, For best results, air dry. CAUTION: Upright storage of the Steam Mop with a wet mop pad may result in the formation of white marks on your floor.
Troubleshooting Reduced steam or no steam. Possible Causes Remedies 1. 2. 3. 1. Fill tank 2. Replace water filter 3. Refer to NOTE on page 9 Water tank empty Depleted water filter Blocked steam nozzle Other maintenance or service not included in the manual should be performed by an authorized service representative. Thank you for selecting a BISSELL product. Please do not return this product to the store. Replacement parts Item 1 2 3 4 5 1 Part No.
Warranty - BISSELL Steam Mop™ Hard Floor Cleaner This warranty gives you specific legal rights, and you may also have other rights which may vary from country to country. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Care by E-mail, telephone, regular mail as described below, or contact your local in country distributor.
BISSELL consumer care For information about repairs or replacement parts, or questions about your warranty, please call BISSELL Consumer Care: For UK inquiries: Telephone: 0844.888.6644 Monday – Thursday 9 am – 5 pm Friday 9 am – 4 pm Or write: BISSELL Homecare (Overseas) Inc. Ground Floor 226 Berwick Avenue Slough Berkshire, SL1 4QT United Kingdom For all other inquiries: USA Headquarters 01.616.453.4451 Monday – Friday 8 am – 4 pm Or write: BISSELL Homecare, Inc. P.O.