User`s guide

Gettingready
1. RemoveVacuumFlexHosecompletely from OnBoard
HoseStorage.
2. Attach4" Tool, 6" Tool,*"IhrboBrush*or CreviceTool*to
Grip TriggerUnitby pressingTool onto Grip/TriggerUnit -'-"_. _W'v'"_
firmly,until button snaps into hole. Makecertain _ _"=
Toolissecurely attached.
3. UnwrapPowerCordcompletelyfrom On Board
CordStorageand plug into 120Volt,60 Hzgrounded
outlet as describedin Important SafetyInstructions,page 2.
4. Ifcleaner starts when first plugged in, switchcleaner off
until ready for use.
5. MovePowerswitch to ONposition.
6. Ifyour Httle Greenhas a built-in heater, referto instructions
on page 5.
7. press and hold SprayTriggeron Grip/Triggerunit. Spray
willstart in a fewseconds.
8. Raise the toolslightly to check for spray.If spraydoesnot
start, pressfirmlyon the frontof the Solution Tank while
depressingSprayTrigger.
*OptionalonsomeLiMeGreenmodels.Toorderoptionalpartsnotoriginally
includedinyourLittleGreenmodel,callBISSELLConsumerServicmat
the telephonenumber listedon page 9.
Pre-treating
1. Pre-treatstained or highly soiled areas: Hold the tool
4"- 6" abovecarpet or upholstery,,and pull triggerto
spray cleaning solution.
2. Wait3-5 minutes beforecleaning.
Deep cleaning
1. Place thetool directlyon soiledsurface at arms length.
Applydownwardpressure on the tool and pull towardyou,
whilepulling trigger to spray cleaning solution.
NOTE:Ifusing the TurboBrush. tile s_itch should be in the "'BRUSH"
position. Thisac'tiva_ the brush onl,v
2. Repeat, keepingthe toolfirmly against the surface.
Continue until no more dirt can be removed.
Do not overwet.
NOTE:If using theTurboBrush, move the switch to the "SUCTION"
position. This activates the stiction to remo_ethedirt and cleaning
solution. Movethe _itch back to the "BRUSH"position for additional
brushing action.
DO not overwet.
3. Releasespray trigge_Vacuum area until no more
cleaning solution can be removed.
NOTE:Ifusing the TurboBrush. movethe switch to the "SUCTION"
position.Thisactivat_thesuctiontoremovethedirtandcleaningsolution.
4. Ifthe toolstopsspraying, tuna OFFPowerSwitchand check
cleaningsolutionlevel.Refillffneeded.Neverrun dry.