User Manual

4. Pretreating (optional)
Pretreating is recommended to improve cleaning
effectiveness for heavily soiled carpet in high
traffic areas such as entryways and hallways.
BISSELL Stain PreTreat
a. Spray the BISSELL Stain PreTreat
formula onto heavy traffic areas, soiled
areas, or stains.
b. Allow to penetrate for at least 3 minutes.
c. Clean as normal, using the BISSELL
PROheat 2X machine on the high traffic
setting, following the instructions below.
Carpet cleaning
1. Fill the 2-in-1 Water Tank. Remove the tank from
the base of the machine by lifting up the tank
carry handle. Carry like a bucket to the sink.
a. Unlatch the top of the tank from the
bottom by lifting up on the tank latch
located on the back of the tank.
b . Remove the top of the tank by lifting
up on the handle.
Note how the lip on the top tank separates
from the groove in the bottom tank. This
placement is important when putting the
tank back together.
c. The measuring cup provided holds
2.5oz when filled to the fill line. Using
the measuring cup provided, pour 5oz
of BISSELL 2X formula into the heavy
duty bladder. Fill the rest of the heavy
duty bladder with hot tap water
(140°F/60°C MAX). DO NOT BOIL
OR MICROWAVE WATER.
NOTE: Always use genuine BISSELL 2X
formulas to maximize cleaning and for
the safety of your machine.
d. Leaving the filled bottom of the tank on
a flat surface, only maneuver the top of the
tank. To attach the top part of the tank to
the bottom, carefully hook the lip on the top
tank into the groove on the bottom tank.
e . Fasten tanks together by securing the
latch in the back.
NOTE: Remember to secure the tank latch in
the back and test to make sure it is secure
before picking up the tank.
Operatis
www.BISSELL.com 800.237.7691
7
1.
1b.
1a.
1c.
1d.
1e.
WARNING
To reduce the risk of fire and electric shock due to internal
component damage, use only BISSELL cleaning fluids
intended for use with the deep cleaner.