543 SERIES SYMPHONY PET ALL-IN-ONE VACUUM AND STEAM MOP USER GUIDE ™
IMPORTANT SAFETY INSTRUCTIONS persons in order to avoid a hazard. » If appliance has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an authorized service center. » Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces. » Do not unplug by pulling on cord. To unplug, grasp ALWAYS CONNECT TO PROPERLY GROUNDED the plug, not the cord. OUTLET.
Thanks for buying a BISSELL hard floor cleaner We’re glad you purchased a BISSELL hard floor cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your BISSELL hard floor cleaner is well made, and we back it with a limited two-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Care department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
Product View 1 Steam Trigger 2 Easy Touch Digital Controls™ – LO/HI Steam & Vac On/Off 3 Cord Clip 4 Handle 5 Water Cup 6 25’ Power Cord 7 Water Tank with Easy Fill Opening 8 Vacuum Filter 9 Drop-IT Pet Hair Removal System 10 Bottom Empty Dirt Bin 11 STEAMBOOST Disposable Pads 12 Microfiber Mop Pads 13 Quick Release Pad Tray™ 14 Water Filter (varies by model) 15 Carpet Glider (varies by model) 16 Scent Disk (varies by model) 17 STEAMBOOST Tray 18 Vacuum Nozzle 1 2 3 4 5 6 7 12 5 8 9 14 15 16 17
Assembly Your hard floor cleaner assembles quickly and easily, no tools required. To assemble the unit Insert the body into the foot until you hear the locking tab click. Insert the handle into the body of the unit until you hear a locking tab click. WARNING Do not plug in your hard floor cleaner until you are familiar with all instructions and operating procedures. WARNING Exercise extreme care when using the Symphony on hardwood floors.
Operations Special Features Easy Touch Digital Controls™ The fingertip power controls are located on the front of the handle. Settings include: (HI) – High Steam Use for durable floors or on sticky messes. To turn steam on, press once. Click again to turn steam off. Can be used simultaneously with the vacuum function or separately as a steam mop only. (LO) – Low Steam Use on delicate floors or for light, everyday cleaning. To turn steam on, click once. Click again to turn steam off.
Operations Getting Ready WARNING The mop pad may have already come attached to the mop pad tray on the foot of the unit. If not, please follow step 1 below. Do not operate appliance with damp or wet filters or without all filters in place. For Microfiber Mop pads, please follow these steps: Microfiber Mop Pad 1. Attach mop pad. a. Step on foot release for mop pad tray and lift unit off tray. . Some units may come with freshening b discs. Add Freshening Disc in the mesh pocket in the mop pad.
Operations 2. Fill the water tank. . On the back of the unit, open the Easy a Fill opening of the water tank and use the included water cup to fill the water tank with water. Don’t overfill or water may spill from the tank. For best results, water should be at room temperature. b. Close the Easy Fill opening. . The water tank holds 13oz. and will last c approximately 15 minutes depending on the amount of the steam used during cleaning.
Operations WARNING Using Your Symphony Hard Floor Vacuum and Steam Mop To reduce the risk of electric shock, turn power switch off and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks. The hard floor cleaner can be used as a stick vacuum and a steam mop at the same time or separately. For best results and time savings, use the powerful vacuum to clear floor of dust and small debris as you steam mop.
Maintenance & Care WARNING Removing All Mop Pads 1. Unplug hard floor cleaner from electrical outlet. 2. Step on foot release for mop pad tray and lift unit off tray. 3. Carefully remove mop pad from the mop pad tray using the Quick Release™ Tab. The mop pad and tray may be hot. 4. Put the mop pad tray back down on the floor and set the unit back on top. It will click into place. 5. The microfiber mop pad can be machine washed in warm water. Use only liquid detergents.
Maintenance & Care WARNING Cleaning or Replacing the Vacuum Filter To reduce the risk of electric shock, turn off machine and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks. The key to maximum performance is having a clean filter. Cleaning the filter after each use will help your vacuum operate at peak efficiency. Use only genuine BISSELL Symphony replacement filters in your BISSELL hard floor cleaner. To purchase visit www.BISSELL.com.
Maintenance & Care Thermal Protector An internal thermal protector has been designed into your vacuum to protect it from overheating. When the thermal protector activates, the vacuum motor will stop operating. If this happens: WARNING To reduce the risk of electric shock, turn power switch off and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks. 1. Turn the cleaner OFF and unplug from electrical outlet. 2.
Maintenance & Care WARNING Cleaning Hose Tube 1. Grab bottom end of the hose and pull lower portion away from the body. To reduce the risk of electric shock, turn power switch off and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks. 2. Seperate the hose into two pieces. 3. Wash hose and wait for it to dry. 4. Align the top of the hose to the groves on the hose opening of the unit. 5. Twist hose down to insert lower portion of hose to the unit.
Troubleshooting Problem Vacuum cleaner has low suction Visible dirt escaping from cleaner Reduced steam or no steam Possible causes Remedies Dirt container is full Empty dirt container Dirt container is not installed properly Position container correctly and move lock button to the right until it is in the center of the unit Foot is loose Make sure foot is fully inserted into body of unit Filters need cleaning Follow filter instructions on page 13 Filters need replacing Visit www.bissell.
Warranty Service Limited Two-Year Warranty Visit BISSELL.com or contact BISSELL Consumer Care to locate a BISSELL Authorized Service Center in your area. If you need information about repairs or replacement parts, or if you have questions about your warranty, contact BISSELL Consumer Care. This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state.
Register your product today! Registering is quick, easy and offers you benefits over the lifetime of your product. You’ll receive: BISSELL Rewards Points Automatically earn points for discounts and free shipping on future purchases. Faster Service Supplying your information now saves you time should you need to contact us with questions regarding your product. Product Support Reminders and Alerts We’ll contact you with any important product maintenance reminders and alerts.
