IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING YOUR DEEP CLEANER. Go ee lone WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY: NOTE: STORE CLEANER IN A PROTECTED, DRY AREA. SINCE THIS PRODUCT USES WATER, IT MUST NOT BE STORED WHERE THERE IS A DANGER OF FREEZING. FREEZING WILL DAMAGE INTERNAL COMPONENTS AND VOID THE WARRANTY, SAVE THESE INSTRUCTIONS FOR FUTURE USE This node or household use ed. WARNING GROUNDING INSTRUCTIONS —~ Grounded Outlet rounding Pin www.BISSELL.
Thanks for buying a BIS SELL carpet cleaner! We love to clean and we're excited to share one of our innovative products with vou, We want to make sure your carpet cleaner works as well in three years as it allay, so this guide has tips on using (page TH. maintaining (page 1417), and if there is a problem, troubleshooting (1p st @ few simple assembly steps, volley be ready to deep clean. Flip to at started 5 and le Package Contents Upper Handle 1 Screw attached to Upper Handle .
Getting to Know Your Deep Cleaner Upper Handle Easy Fill/Formula Cap Clean Water Tank (1 Gallon Capacity} Power Button Float Stack Dirty Water Tank Belt Access Door Foot Spray Trigger In-Use Cord Clip Fool wa www Tessellation Cleaning Mode Switch Accessory Hose Door Belt/Brush Access Plate EdgeSweep® Brushes Carry Handle Rubber Tab {on Dirty Water Tank) Quick Release for Wrapped Cord Recline Pedal
Assembly ail [lean ET ne Ea Ten a TE and emitting procedures, Your deep cleaner + Base comes in four easy-to-assemble components and an accessory bag, + Upper Handle san Water Tank Carry Handle The only tool you will need to assemble your deep cleaner is a Phillips screwdriver, v First, insert the upper indie at the top of the base until you hear a “click”. Side View Next.
Cleaning Formulas ate man wes oe se BT Keep plenty of genuine BIS SELL 2X" Always use genuine BIS SELL deep formula on hand so you can clean and cleaning formulas. Non-BIS SELL cleaning protect whenever it fits your schedule. solutions ray harm the machine and will void the warranty. BOOST RETREAT PRE TREAT SPOTS AND STAINS TO IMPROVE CARPET CLEANING FORMULA ENHANCER CARPET CLEARING PERFORMANCE Ory Boost | Renew Boost Prevent Boost.
Customize Your Clean & Maximize Your Results For Antibacterial Clean: Use BIS SELL Deep Clean + Antibacterial formula Use BIS SELL Deep Clean + Antibacterial with the Deep Clean Mode of your machine to achieve antibacterial results. To Clean Dark Stains: Remove stains permanently! Use BIS SELL Deep Clean + Oxy formula or arid BOOST OXY 10 any of your favorite BIS SELL formulas to maximize the stain removal power.
Customize Your Clean & Maximize Your Results Retreat Po sky Stains Retreat stains for improved deep cleaning performance. Stains may include but are not limited to: Choose Your Formula BOOST Your Deep Clean Prepare your deep cleaner using the dosing Instructions or thi lines. Always use genuine BIS SELL deep cleaning formulas. » coffee Non-BIS SELL cleaning 5 clit solutions may harm the oil machine and will void the warranty.
Filling Your Clean Water Tank: easy fills formula i you're not using a formula with a yellow easy fill cap, please refer to filling instructions on page ffm Clean Water Tank (1 Nation) ffm Dirty Water Tank Lift the dean water tank straight up to remove from the machine The clean water tank is at the top of the machine.
Filling Your Clean Water Tank: 2X Concentrated Formula iff cream Water Tank fom) (1 Gal ifn Dirty Water Tank The clean water tank is at the top of the machine. Lift the clean water tank straight up ta remove from the machine Unscrew the cap from the clean water tank. Add hot tap water to the water fll line. Next, reference the chart below for formula amounts to add to the tank.
Cleaning Yo ur Carpet Plug into a properly grounded outlet. v Select cleaning mode: Deep Clean Delivers a deep clean to your carpet. Express Clean Provides a lighter clean with about 1 hair of dry time. “Choose “Deep Clean” mode and use BIS SELL Deep Clean + Antibacterial to deliver antibacterial benefits. Press the power button to tum the machine on To recline your machine for use, press the recline pedal with your fat, Deep Clean Mode: 1.
Cleaning Area Rugs Important! Please check manufacturer's tag before cleaning area rugs foray specialized cleaning instructions. Not for use on silk or delicate area rugs. Regularly clean your high-traffic area rugs in Express Clean mode to remove the forgotten dirt, Important: Keeps the foot of the deep Select Express Test in a small Clean Mode.
Cleaning with the Bare Floor Tool With the machine unplugged, attach the bare floor tool to the bottom of the machine by lining the tool to the edge of the nozzle. Rotate down und it clicks into place, Fallow filling instructions on page 10 and switch cleaning mode to Express Clean. Plug into a properly grounded outlet and press the power button.
Maintenance: Empty Dirty Water Tank WARNING Bal Se ad Coe ee ede Te EE eee Se ane To release dirty water tank, press down on the colored tank handle. Tilt the tank slightly toward you. Grab the handle and tank with both hands. Pu if dirty water tank up and away 10 remove, For quick empty: Bull the rubber tab and Hit to pour (Located at the comer of the top of the tank.) When dosing the rubber tab, make sure all edges are sealed tight. For final clean and _. rinse: Unscrew the ring at the bottom of tank.
Maintenance: Cleaning Machine After Use de ratty he Hie ee bower Side First, fill the clean water tank with warm tap water and then employ it all to rinse. Then fill again with warm tap water and return the tank to the machine. Twist cap back on tightly. To flush and rinse the machine: Turn the machine on and press the trigger for 15 seconds while making back and forth passes on a section of carpet. Finally, release the trigger and suck up the water.
Maintenance: Cleaning the Brush Rolls Turn off and unplug the machine from the grounded outlet. Lay the machine down on its back or side. Use the comics tu brush out the debris or hair from the brush rolls. or Brush Rolls Maintenance: Replacing Small Belt, Large Belt, What you will need: 1 Phillips screwdriver & 1 Flathead screwdriver. o Remove the clean water tank and make sure the dirty water tank is empty, then press the recline pedal and lay the machine on its side.
Maintenance: Replacing Small Belt, Large Belt, or Brush Rolls (continued) If the belt is Broken, gently remove Tt from the machine To replace the large belt, place it over the red area of the large pulley that is toward the front of the machine, Stretch the belt 07 towards the back of the machine with your thumb and transfer it onto the metal axle.
Troubleshooting WARNING Coc See de Te Eee Se ane Ta Passable causes Remedies Clean water tank may be empty Refill tank Clean water tank may not be Turn.
Warranty This warranty gives you specific legal rights. and you may alas have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BIS SELL Consumer Care by E-mail, telephone, or regular mail as described below.
Register your product today! Registering is quick, easy and offers you benefits over the lifetime of your product. You'll receive: BIS SELL Rewards Points Automatically earn points for discounts and free shipping on future purchases. Product Support Reminders and Alerts Well contact you with any important product maintenance Faster Service Supplying your information now saves you dime shooed you need to contact us with questions regarding your product reminders and alerts.
