Quick Start Guide

QUICK START GUIDE
For further instructions
reference the User Guide or visit
www.BISSELL.com
FILL WITH WATER
Fill Instructions
Clean Water
Tank
Dirty Water
Tank
DON’T FORGET!
Place the tank back on
the unit.
1. Locate the Clean Water
Tank on back side of the Pod
2. Pull handle up and lift
Clean Water Tank
3. Remove Cap, fill with hot
tap water (140F/60°C) to
Water Line.
ANTIBACTERIAL FORMULA
With Trial Size Antibacterial
Formula: After adding hot
water, pour the antibacterial
formula into the clean tank
up to the EasyFill line. Twist
the cap back onto the tank.
For Future Use with Full-Size Antibacterial
Formula: After filling the clean tank with
hot water, twist the yellow cap back onto the
tank. Firmly insert the full size formula bottle
into the cap on the clean tank and squeeze
until formula reaches the EasyFill line.
BISSELL
+
2X FORMULA
After adding hot water to the
tank, add 1.5 oz of 2X formula.
Deep Cleaning
Tips & Tricks
›› Vacuum first to remove all loose dirt,
debris, and pet hair before deep
cleaning your carpet.
›› Plan a cleaning route to leave an exit
path. It is best to begin cleaning in
the corner farthest from your exit.
›› Ensure your machine is stored
properly for the next time you use it!
For details on how to properly store
your machine, refer to User Guide.
Choose Your Formula
BISSELL
+