User Guide

Spray Tip

www.BISSELL.com

Remove the screw

that is within the

clear plastic

Maintenance: Cleaning Machine After Use

To clean machine before

storing it, fill the Formula

& Water Tank with hot tap

water only, in order to flush

out any residual formula

Turn unit on, press and

hold the trigger for

15 seconds while making

back and forth passes

Release trigger and

suction up all of the water

Remove the pod from the

base. Press the tabs on the

black ends of the spray tips to

remove and rinse off before

returning them to the base

Unscrew three screws with

a Phillips screwdriver from

the clear Brush Rolls covers

Before replacing clear

cover, inspect the

Brush Rolls and remove

any debris

Wipe out the end caps with a

clean paper towel

Rinse and replace clear Brush Covers,

carefully aligning top cover tabs along

front slots of bottom cover

Spray Tips

Screw 1

Screw 2

Screw 3

Two Covers

Pivot into place

Insert Tabs

into slots

WARNING

To reduce the risk of electric shock, turn power switch o and disconnect plug from

electrical outlet before performing maintenance or troubleshooting checks.