User Guide

www.BISSELL.com
7
Fill Formula & Water Tank: EasyFill
1
Pull handle up and lift
Clean Water Tank.
Locate the Clean Water Tank
on back side of the Pod.
Place the tank back
on the unit.
54
NOTE: Fill with hot (140°F/60°C MAX) tap
water and add the appropriate BISSELL
solution. DO NOT HEAT WATER OR TANK
IN MICROWAVE, OR USE BOILING WATER.
NOTE: For Easy-Fill Anti-Bacterial
cleaning benefits, do not add
additional cleaning formulas.
2
TIP: Attaching the Pod
• When the portable machine is seated correctly, the heated cleaning light will
illuminate when you turn the machine on.
• If the heat indicator light does not illuminate, release the pod and re-secure
by pushing firmly until both sides snap into place.
Clean
Water
Tank
Dirty
Water
Tank
Remove Cap, fill with hot
tap water (140F/60°C) to
Water Line.
For Future Use with Full-Size
Antibacterial Formula:
BISSELL
+
3
After filling the clean tank with hot
water, twist the yellow cap back
onto the tank. Firmly insert the full
size formula bottle into the cap on
the clean tank and squeeze until
formula reaches the EasyFill line.
NOTICE: Do not over wet carpet. Take care not to run over loose objects or edges
of area rugs. Stalling brush may result in premature belt failure.
NOTICE: BISSELL Deep Clean + Antibacterial formula is only for BISSELL
machines with EasyFill System™.
With Trial Size
Antibacterial Formula:
After adding hot water,
pour the antibacterial
formula into the clean
tank up to the EasyFill
line. Twist the cap back
onto the tank.