User Guide

www.BISSELL.com
9
Clean Carpet: Upright Mode
1
After confirming Formula & Water
Tank is filled properly, press the power
button, located on the Cord Wrap side
Plug into a properly grounded outlet
Indicator light turns on when unit is
plugged in, power switch is pushed and
Pod is seated correctly.
Press recline pedal to release handle.
If light doesn’t
turn on, reseat
Pod
Listen for
two clicks
“Click”
“Click”
Power
Button
3
2
5
4
Press the trigger to apply
solution. Slowly make 2
wet passes, one forward
and one back. Release
the trigger to recover the
dirty solution by slowly
making 2 dry passes, one
forward and one back.
Press trigger to apply
solution. Slowly make 3
wet passes, one forward,
one back and one more
forward. Release the
trigger to recover the dirty
solution by slowly making
a final dry pass back.
NOTE: The ProHeat 2X® Lift-O® Deep Cleaner may be equipped with a circuit
breaker that automatically shuts o the brush if a large or loose object catches in
the brush roll. If that occurs, unplug your machine, remove the foreign object, and
plug the unit back in to reset circuit breaker.
NOTICE: Some Berber carpets have a tendency to fuzz with wear. Repeated
strokes in the same area with an ordinary vacuum or deep cleaner may aggravate
this condition.
2X Formula
Recline
Pedal