User Manual

www.BISSELL.com
10
Hands-Free Cleaning
Important! Please check manufacturer’s tag before cleaning area rugs for any
specialized cleaning instructions. Not for use on silk or delicate area rugs.
Getting Started
21
Select which cleaning cycle (Quick Clean
or Deep Clean) you would like
to use. SpotBot will begin spraying,
brushing and suctioning the soiled area, in
a pre-programmed cycle. Both cycles have
been tested and proven to deliver superior
cleaning results, taking the guesswork and
effort out of cleaning for you.
Pick up the unit and check the area that
was cleaned.
If you use BISSELL Oxy Boost, it will
continue to work for the next six to eight
hours, cleaning your spots and stains all
the way to the backing of the carpet.
Place the unit directly over the spot or
stain, making sure the stain is in the center
of the cleaning area.
When the cleaning cycle you have
selected is complete, the Done light will
illuminate and the machine will sound a
series of “beeps”. Press the STOP button
to turn the machine off. The machine will
not beep when turned off
3 4
Before using, test a small
inconspicuous area for
colorfastness.
Select “Hose/Tool” and follow
manual cleaning instructions on
page 11 to test.
21
ATTENTION: To prevent damage to Berber carpets, avoid repeated cleaning
cycles in the same area.