User Manual

www.BISSELL.com

• Check upholstery stung before cleaning. Colored stung may bleed through

the fabric when it becomes wet. Check manufacturer’s tag before cleaning.

Manual Cleaning

Remove the Tough Stain Brush from the

back of the unit, then attach it onto the

grip of the hose.

Press the spray trigger button to spray

the soiled area, then slowly move tool

back and forth over the area.

Release the trigger to suck up the dirty

solution. Work in small sections until the

area is clean.

Remove the hose from the unit by

depressing the release button.

Select the Hose/Tool button on the

control panel to start the SpotBot.

3 4

If the stain is still visible, repeat step 4 as necessary.

NOTE: In manual mode, the SpotBot is equipped with a safety feature which will

shut the unit o after 30 minutes.