Steam Mop ™ USER’S GUIDE 1867 SERIES 3 Safety Instructions 4 Product View 5-6 Assembly 6 Special Features 7-8 Operation 8-9 Maintenance and Care 9 Troubleshooting 10 Consumer Services 11 Replacement Parts 12 Warranty ug120-4065_1867_908.
Thanks for buying a BISSELL Steam Mop We’re glad you purchased a BISSELL Steam Mop. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your Steam Mop is well made, and we back it with a limited one-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance. My great-grandfather invented the floor sweeper in 1876.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: Read all instructions before using your STEAM MOP™ WARNING: To reduce the risk of fire, electric shock, or injury: ■ Do not direct steam at people, animals, or at electrical outlets. ■ Do not expose to rain. ■ Store indoors. ■ Unplug from outlet when not in use and before conducting maintenance or troubleshooting. ■ Do not leave steam cleaner unattended.
Product view Strain Reliever Handle™ Trigger Quick Release™ Cord Wrap Power Cord Carrying Handle Lower Cord Wrap Water Tank Filter Ready Light Swivel Head Mop Pad Toggle Mop Pad Optional Accessories: Mop Pads - 2 pack 4 Storage Hook With Screws www.bissell.com ug120-4065_1867_908.indd 4 800.237.
How to use this guide This user’s guide has been designed to help you get the maximum satisfaction from your BISSELL Steam Mop hard floor cleaner. You’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this guide thoroughly before assembling your Steam Mop. Pay particular attention to the product diagram, assembly instructions, and part names. Locate and organize all parts before assembly.
Assembly 1. Attach lower body to swivel head. 2. Secure swivel head with small Phillips head screw. Tighten until secure. 3. Slide handle assembly down into lower body until it will go no further. 4. Secure the handle by placing the large Phillips head screw through the screw opening in the lower body and into the rear of the handle assembly. Tighten with screwdriver until secure. 5. 1 2 3 4 Slide water tank onto lower body by lining up vertical glides and gently sliding tank into place.
Operation Getting ready 1A 1B The mop pad may have already come attached to the swivel head, if not follow steps 1A and 1B below. 1. Attach mop pad. A. Set swivel head in mop pad, making sure toggle is located on the back. 2A 2B B. Tighten mop pad by pulling on elastic cord while pressing on toggle. 2. Fill the water tank A. Remove tank by lifting straight up and away from unit. 2E B. Unscrew cap at bottom of water tank and remove the insert assembly. C. Fill water tank with water.
Operation Cleaning hard floors Your Steam Mop is designed to clean hard flooring such as ceramic tile, vinyl, laminate, marble, stone and sealed hard wood floors. Use of your Steam Mop on waxed or some unwaxed floors may result in a diminished glossiness. The Steam Mop is not for use on unsealed wood floors. For best results test in an inconspicuous area or check the care instructions from your flooring manufacturer. 1.
Maintenance and care Replacing the water filter Tip: If you fill your Steam Mop cleaner with normal tap water, it is essential to check the water filter and replace it when it is no longer effective. Change the filter when the bright green grains turn blue. If the filter is not changed at the appropriate time, calcium deposits will accumulate on the heating element, causing damage or reduced performance. Using distilled or demineralized water will maximize the performance of your filter.
BISSELL Consumer Services For information about repairs or replacement parts, or questions about your warranty, call: BISSELL Consumer Services 1-800-237-7691 Monday - Friday Saturday 8 a.m. — 10 p.m. ET 9 a.m. — 8 p.m. ET Or write: BISSELL HOMECARE, INC PO Box 3606 Grand Rapids MI 49501 ATTN: Consumer Services Or visit the BISSELL website - www.bissell.com When contacting BISSELL, have model number of unit available.
Replacement parts - BISSELL Steam Mop Item Part No. Part Name 1 2 3 4 5 6 018-5600 203-2167 203-2158 203-2159 603-2046 203-2168 Water Filter Handle Assembly with Screw Mop Pads - 2 pack Water Tank with Cap and Insert Cap and Insert Assembly Storage Hook with Screws 1 2 4 5 3 6 Earn Rewards Points! To qualify you for discounts, rebates, and other BISSELL perks. Visit www.bissell.com/rewards to learn more. www.bissell.com ug120-4065_1867_908.indd 11 800.237.
Warranty - BISSELL Steam Mop This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below. Limited One Year Warranty Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL Homecare, Inc.
