User Guide

10
Product Care
Your BISSELL Multi doesn’t need much maintenance: keep the filter clean,
check for blockages, remove hair from the brushbar and charge the battery.
Wipe it with a dry cloth if it gets dirty, including the area under the bin. Never
wash it with liquid, run it under a tap or use it without the filter.
www.BISSELL.com
WARNING
To reduce the risk of electric shock, turn power switch o and disconnect plug from
electrical outlet before performing maintenance or troubleshooting checks.
Problem Possible causes Remedies
Multi
won’t turn on
Battery isn’t fully charged Charge battery following
instructions on page 7
Wrong charger being used Be sure to use only the charger
supplied with your product
Multi is not
cleaning well
Dirt bin is full Empty dirt bin
Dirt bin is not installed properly Position bin correctly and
snap firmly into place
Filters need cleaning Follow filter cleaning instructions
on page 8
Filters need replacing Visit www.bissell.com or
call 1-800-237-7691 to order
replacement filters
Clog or obstruction Clean the holes in the filter
housing and check for blockages
Trouble Shooting