QuickSteamer® USER’S GUIDE 1770/1970 SERIES QUICKSTEAMER 2080 SERIES QUICKSTEAMER POWERBRUSH 2090 SERIES QUICKSTEAMER MULTISURFACE 3 Safety Instructions 4 Product View 5 Assembly 6-8 Operations 8-9 Maintenance 10 Troubleshooting 10 Consumer Services 11 Replacement Parts 12 Warranty ug603-5603_1770_206.
Thanks for buying a BISSELL QuickSteamer ® We’re glad you purchased a BISSELL QuickSteamer Lightweight deep cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your QuickSteamer is well made, and we back it with a limited oneyear warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: Read all instructions before using your QUICKSTEAMER® WARNING: To reduce the risk of fire, electric shock, or injury: ■ Do not immerse. ■ Use only on surfaces moistened by cleaning process. ■ Always connect to a properly grounded outlet. See Grounding Instructions. ■ Unplug from outlet when not in use and before conducting maintenance or troubleshooting.
Spray Trigger Quick Release Cord Wrap™ Power Cord Handle Assembly Clean Water/ Solution Tank Lower Cord Wrap Upper Body Lower Body Large Easy Rolling Wheels Power Switch Vent Cover (Containing Foam Filter) Detent Lever Collection Tank Collection Tank Latch BISSELL Formulas: Removable Nozzle These items are available for purchase with your model. To order replacement parts or additional tools or formulas, please refer to page 11. 48 oz.
How to Use this Guide This User’s Guide has been designed to help you get the utmost satisfaction from your BISSELL QuickSteamer Lightweight Deep Cleaner. You’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this Guide thoroughly before assembling your Deep Cleaner. Pay particular attention to the product diagram, assembly instructions, and part names. Locate and organize all parts before assembly.
How to Use Your BISSELL QuickSteamer Before You Clean 1. 2. 3. 4. 5. 6. Plan activities to give carpet time to dry. Remove easily moved furniture (chairs, lamps, coffee/cocktail tables, etc.) from room if needed. Vacuum carpet thoroughly. Decide where to begin — and end — your job. Clean in 3’ X 4’ sections, starting in areas farthest from exit. Plan to leave a path open to empty soiled water and refill cleaner.
Carpet Cleaning 1. 2. 3. 4. 5. 6. 7. 8. With your foot, press the red Power Switch [located in foot of unit] ON. With foot, press the Detent Lever on right side of Lower Body. Depress Spray Trigger to spray cleaning solution. Do not overwet. To suction up water, repeat motion over same area without depressing Trigger. Repeat Steps 3 and 4 until no more dirt can be removed. Continue to clean entire carpet, working in 3’ x 4’ sections.
WARNING: To Reduce the Risk of Fire Cleaning Fluid Section and Electric Shock due to internal component damage, use only BISSELL cleaning fluids intended for use with the deep cleaner. NonBISSELL cleaning solutions may harm the machine and void the warranty. Keep plenty of genuine BISSELL Fiber Cleansing Formula™ on hand so you can clean and protect whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas. 48 oz.
To Install the Replacement Brush Belt *QuickSteamer PowerBrush models only 1. 2. 3. Turn the machine off and unplug from wall outlet. Remove Clean/Solution and Collection Tanks. Lie machine down to access the bottom of the machine. 4. With a Phillips head screwdriver, unscrew the Brush Cover and remove. 5. Remove the Brush End Cap and remove belt from brush. 6. Brush can now be removed. 7. Belt can be removed by sliding off the Motor Pulley. 8. Clean or replace belt.
Troubleshooting Reduced Spray Or No Spray. Remedies 1. Refill Tank with water and formula Possible Causes 1. Clean Tank empty Deep Cleaner Not Picking Up Cleaning Solution. Possible Causes 1. Collection Tank not aligned/secured 2. Dirty Tank full 3. Removeable Nozzle installed improperly Remedies 1. Check Tank proper alignment and secure with side latches 2. Empty Tank 3. Align four "hooks" into bottom first, then snap into place on top Thank you for selecting a BISSELL product.
Replacement parts - BISSELL QuickSteamer Below is list of common replacement parts*. While not all of these parts may have come with your specific machine, all are available to you for purchase, if desired. Item Part No.
Warranty - BISSELL QuickSteamer This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below. Limited One Year Warranty Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL Homecare, Inc.