QuickSteamer® USER’S GUIDE 1770, 1970, 2080, 2090 SERIES 3 Safety Instructions 4 Product View 5 Assembly 6-8 Operation 8-9 Maintenance and Care 10 Troubleshooting 10 Consumer Services 11 Replacement Parts 12 Warranty ug120-4071_1770_908.
Thanks for buying a BISSELL QuickSteamer ® We’re glad you purchased a BISSELL QuickSteamer lightweight deep cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your QuickSteamer is well made, and we back it with a limited one-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: Read all instructions before using your QUICKSTEAMER® WARNING: To reduce the risk of fire, electric shock, or injury: ■ Do not immerse. ■ Use only on surfaces moistened by cleaning process. ■ Always connect to a properly grounded outlet. See Grounding Instructions. ■ Unplug from outlet when not in use and before conducting maintenance or troubleshooting.
Product View Quick Release Cord Wrap™ Spray Trigger Handle Assembly Power Cord Upper Body Lower Cord Wrap Lower Body Solution Tank Vent Cover (Containing Foam Filter) Large Easy Rolling Wheels Collection Tank Collection Tank Latch Detent Power Lever Switch Removable Nozzle WARNING: To reduce the risk of fire and electric shock due to internal Cleaning fluid component damage, use only BISSELL cleaning fluids intended for use with the deep cleaner.
How to Use this Guide This user’s guide has been designed to help you get the utmost satisfaction from your BISSELL QuickSteamer lightweight deep cleaner. You’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this guide thoroughly before assembling your deep cleaner. Pay particular attention to the product diagram, assembly instructions, and part names. Locate and organize all parts before assembly.
Operation Before you clean 1. 2. 3. 4. 5. 6. Plan activities to give carpet time to dry. Remove easily moved furniture (chairs, lamps, coffee/cocktail tables, etc.) from room if needed. Vacuum carpet thoroughly. Decide where to begin — and end — your job. Clean in 3’ X 4’ sections, starting in areas farthest from exit. Plan to leave a path open to empty soiled water and refill cleaner. Carpeting will dry in three to four hours, depending on carpet style and air circulation in room.
Operation Tip: Carpet cleaning 1. 2. 3. 4. 5. 6. 7. 8. To empty the collection tank 1. 2. 3. It is recommended that every time your solution tank needs refilling, that you empty the contents of the collection tank. If the collection tank gets too full, you may begin to see foam spitting out of the vent cover. If this happens empty the collection tank. With your foot, press the red power switch [located in foot of unit] ON. With foot, press the detent lever on right side of lower body.
Operation 3. 3. Hard floor cleaning (continued) 3. 4. 5. 6. 7. Attach the hard floor tool by hooking it into the front of the removable nozzle and swinging it down until the tabs pop into place. Replace the collection tank. Be sure to attach the 2 latches. Fill solution tank with BISSELL Hard Floor Solutions™ to FORMULA fill line. Fill solution tank with hot (not boiling) tap water to the WATER fill line. Follow steps 1-8 in Carpet cleaning section above. Maintenance and care Machine storage 1. 2.
Maintenance and care To install the replacement brush belt Brush Cover 3. 4. *QuickSteamer PowerBrush models only 1. Turn the machine off and unplug from wall outlet. 2. Remove solution and collection tanks. 3. Lie machine down to access the bottom of 5. the machine. 4. With a Phillips head screwdriver, unscrew the brush cover and remove. 5. Remove the brush end cap and remove belt from brush. 6. Brush can now be removed. 7. Belt can be removed by sliding off the motor pulley. 6. 8.
Troubleshooting Deep cleaner not picking up cleaning solution (Continued) Possible Cause Remedy 4. Removable nozzle full of debris 4. Remove nozzle and rinse under running water 5. Red lint screen under collection tank clogged 5. Remove debris from lint screen Other Maintenance or Service not included above should be performed by an authorized service representative. Thank you for selecting a BISSELL product.
Replacement parts - BISSELL QuickSteamer Item Part No.
Warranty - BISSELL QuickSteamer This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below. Limited One Year Warranty Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL Homecare, Inc.