TURBOCLEAN™ POWERBRUSH PET Deep Cleaner ___________ USER GUIDE 2085 SERIES More of a video person? Look for this icon and go online for an instructional how-to video at www.BISSELL.
IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING YOUR DEEP CLEANER. When using an electrical appliance, basic precautions should be observed, including the following: WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY: » Connect to a properly grounded outlet only. See grounding instructions. Do not modify the 3-prong grounded plug. » Do not leave appliance when it is plugged in. Unplug from outlet when not in use and before servicing. » Use indoors only.
Thanks for buying a BISSELL deep cleaner! We love to clean and we’re excited to share one of our innovative products with you. We want to make sure your deep cleaner works as well in one year as it does today, so this guide has tips on using (pages 6-8), maintaining (pages 9-12), and if there is a problem, troubleshooting (page 14). In just a few simple assembly steps, you’ll be ready to deep clean.
Getting to Know Your Deep Cleaner Handle Spray Trigger Collapsible Handle Lock Upper Body Power Cord Clean Water Tank Carry Handle Lower Body Vent Cover (Foam Filter) Collection Tank Recline Pedal Collection Tank Latch Removable Nozzle 4 www.BISSELL.
Cleaning Formulas WARNING To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning fluids intended for use with the deep cleaner. Keep plenty of genuine BISSELL formula on hand so you can clean and protect whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas. Non-BISSELL cleaning solutions may harm the machine and may void the warranty.
Assembly WARNING Do not plug in your deep cleaner until you are familiar with all instructions and operating procedures. The only tool you will need to assemble your cleaner is a Phillips screwdriver. 2 1 Slide upper body onto lower body. 4 Secure with screws. 5 Be sure to secure upper handle before lifting. Rotate lock collar to secure. Place Clean Water Tank on back of unit. The tank will make a “CLICK” noise when seated properly.
Fill Clean Water Tank 2 1 Remove the clean water tank lifting straight up and away from lower body. Unscrew the cap at the bottom of the clean water tank. 4 3 Replace and tighten the cap, then return the clean water tank to lower body. The tank will make a “CLICK” noise when seated properly. Fill with warm tap water to the WATER line. Fill the rest of the tank with BISSELL Formula to the FORMULA line.
Cleaning Your Carpet Important! Please check manufacturer’s tag before cleaning area rugs for any specialized cleaning instructions. We do not recommend deep cleaning delicate, silk, wool, antique or area rugs without a manufacturer’s tag. 2 1 Extend the Collapsible Handle Post by turning the collar counterclockwise and lifting the handle up. Turn the collar clockwise to secure. Plug into a proper outlet.
Empty Collection Tank WARNING To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. 2 1 With foot, press the red power button, to turn off unit and then unplug. 3 Carefully remove tank by lifting up on the tank carry handle. 5 Rinse the Collection Tank thoroughly and replace on unit. Secure latches on both sides of the tank.
Cleaning Machine After Use WARNING To reduce the risk of electric shock, turn power switch OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks. 2 1 Unplug the unit. Remove and rinse the Collection Tank thoroughly. 4 3 Gently pull the two tabs that point up near the front of the unit. The nozzle will unhook to remove. Rinse under running water.
Replacing Belts & Brush Rolls WARNING To reduce the risk of electric shock, turn power switch OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks. What you will need: 1 Phillips screwdriver & 1 flathead screwdriver 2 1 Turn the machine off and unplug from wall outlet. Remove the Clean Water and Collection Tanks. 3 Lay machine down to access the bottom of the machine. With a Phillips head screwdriver, unscrew the belt cover and remove.
Replacing Belts & Brush Rolls (continued) 7 left side right side Brush Roll Brush Roll End Cap Washers Clean or replace the brush roll and belt. When finished cleaning these parts, reassemble them to the machine. Insert the brush into the right side end cap. Adjust the right side of the brush into place and tuck the left brush roll cap (separate piece that attaches to brush roll) into place. 9 8 Maneuver the belt to wrap around the pulley. Wrap the belt around the cog of the brush roll.
HARD FLOOR TOOL SOLD SEPARATELY Hard Floor Cleaning (select models only) 1 2 Remove the clean water tank lifting straight up and away from lower body. With foot, press the red power button, to turn off unit and then unplug. 3 4 Release Collection Tank latches (on each side) by pulling up from the bottom of latch and then out. Attach the hard floor tool by hooking it into the front of the nozzle. Rotate down until it snaps into place.
Troubleshooting WARNING To reduce the risk of electric shock, turn power switch OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks.
Warranty This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Care by e-mail or telephone as described below.
Register your product today! Registering is quick, easy and offers you benefits over the lifetime of your product. You’ll receive: BISSELL Rewards Points Product Support Reminders and Alerts Automatically earn points for discounts and free shipping on future purchases. Faster Service We’ll contact you with any important product maintenance reminders and alerts. Supplying your information now saves you time should you need to contact us with questions regarding your product.
