MULTI REACH Stick Vacuum ___________ USER GUIDE 2151 SERIES
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT: READ ALL INSTRUCTIONS BEFORE USE. RETAIN INSTRUCTIONS FOR FUTURE REFERENCE. Do not use in rain or leave outdoors while raining. WARNING: Basic safety precautions should always be observed when using an electrical appliance, including the following to reduce the risk of fire, electrical shock, or injury: Personal Safety: Electrical safety: • Store indoors in a dry place out of the reach of children. • Only use batteries and chargers supplied by BISSELL.
• The charger must be removed from the socket before removing the battery, cleaning or maintaining the appliance. • Never modify the appliance in any way as this may increase the risk of personal injury. • Ensure the appliance is off before connecting or disconnecting the motorised brush bar. • Only use replacement parts or accessories provided or recommended by BISSELL.
Thanks for buying a BISSELL vacuum! We love to clean and we’re excited to share one of our innovative products with you. We want to make sure your Multi Reach works as well as it does today for years to come, so this guide has tips on using (pages 5-7), maintaining (pages 8-9), and if there is a problem, troubleshooting (page 10). In just a few simple assembly steps, you’ll be ready to vacuum.
Operation You can use the Multi Reach straight out of the box. The dusting brush can be slotted onto the nozzle. The crevice tool is stored inside the handle. Push the button to switch the Multi Reach ON. Push again to switch OFF. Power floor head assembly To attach the powered floor head, remove the nozzle by pulling gently on the green locking ring until the nozzle comes free from the body. The power must be OFF while changing tools. Take the powered floor head and attach it to the extension wand.
Power floor head assembly (continued) Attach the extension wand to the Multi Reach by aligning white dots and clicking into place. Emptying the dirt bin To remove the dirt bin, firmly grasp the dirt bin and pull out. 6 www.BISSELL.com Locate the release latch and pull to open the dirt bin and empty. You may also remove the filter from the dirt bin. Gently tap the filter to help remove excess dust and debris. Ensure all debris is removed from the seal and latch before closing the lid.
Battery charging Recharge the battery when a single green light flashes. 1-4 slow blinking green lights indicates it is charging. 4 hours After 4 hours the LEDs turn green and charging is complete. Plug the charger in and connect it to the battery. 1 hour boost It is OK to charge for 1 hour for a burst of cleaning. BATTERY LIGHT STATUS Charging 1-4 slow blinking green lights indicate the battery is charging.
Removing and cleaning the brush bar Remove the extension wand from the Multi Reach by pulling gently on the green locking ring. Before you remove the brush bar, you will need to remove the power floor head from the extension floor tube. To do this, gently pull on the green locking ring. Rotate the latch on the side of the powered floor head and pull out the brush bar. Clean the brush bar as needed. Never operate the powered floor head without the brush roll installed. 8 www.BISSELL.
Cleaning the filter Remove the filter by pulling it from the top of the bin. Tap the dirt from the filter and tip any dirt from the filter housing. Wash the filter if necessary. You may gently wash the filter under warm water. Do not use detergents or soaps. The filter must be completely dry before using it. Never put the bin back without the filter inside. You could damage the motor. Removing the battery Press the green buttons and pull to remove the battery.
Product Care Your BISSELL Multi Reach doesn’t need much maintenance: keep the filter clean, check for blockages, remove hair from the brushbar and charge the battery. Wipe it with a dry cloth if it gets dirty, including the area under the bin. Never wash it with liquid, run it under a tap or use it without the filter. Trouble Shooting WARNING To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks.
Warranty This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Care by E-mail, telephone, or regular mail as described below.
Register your product today! Registering is quick, easy and offers you benefits over the lifetime of your product. You’ll receive: BISSELL Rewards Points Automatically earn points for discounts and free shipping on future purchases. Faster Service Supplying your information now saves you time should you need to contact us with questions regarding your product. Product Support Reminders and Alerts We’ll contact you with any important product maintenance reminders and alerts.
