Product Manual

www.BISSELL.com
9
Using the Rinse and Storage Tray
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
Place unit on Rinse and
Storage Tray.
Turn the machine ON by
pressing the Hard Floor
button.
Recline the machine while
in storage tray. Allow the
machine to run for 10-15
seconds until all water is
picked up. Repeat as needed.
Pour water into Rinse Funnel
to fill the MAX line of the
Rinse and Storage Tray.
Grasp Brush Window at the
front of the window and
pull upward to remove.
Pull Brush Roll out by grabbing the
Brush Roll tab and pulling upward.
Place the Brush Roll upright in the Brush Roll
Drying Tray to dry.
1
2
3
4
5
6
7
8
Fill Rinse Cup with water.