ICONpet CORDLESS VACUUM MODEL SERIES 2288, 2774 Go online for a comprehensive walkthrough of your product! This guide has everything you need to get ready for first use, including setting up, using and maintaining your machine, but online you’ll find additional resources like tips and troubleshooting, videos, product registration, parts and more. Go to BISSELL.com/support.
IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING YOUR VACUUM. When using an electrical appliance, basic precautions should be observed, including the following: WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY: »» Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts. Brush Roll continues to rotate when in use. »» Brush Roll continues to turn while product is turned ON and handle is in use.
We’re so happy you chose the ICONpet High-Powered Cordless Vacuum. We put this guide together to help you set up, use and maintain your cordless vacuum. We’ve also included some tips we think will come in handy when you first start using your cordless vacuum, so let’s get started! For a comprehensive walkthrough of your product, go to BISSELL.com/support. Safety Instructions........................................................2 Emptying the Dirt Tank.............................................
What’s in the Box? Standard accessories may vary by model. To identify what should be included with your purchase, please refer to the “Carton Contents” list located on the underside of the insert inside the carton. Hand Vacuum Assembly Extension Wand Motorized Floor Cleaning Foot Battery Charger Wall Storage & Charging Station Lighted Crevice Tool & Dusting Brush Getting to Know Your Vacuum Motorized TurboBrush® Tool For additional support videos and information about your vacuum, visit BISSELL.
Assembly Go to BISSELL.com/support for assembly videos. 1. Connect the Extension Wand to Motorized Floor Cleaning Foot. You’ll hear a “click” when they’re connected. 2. Connect the Hand Vacuum Assembly to the Extension Wand. You’ll hear a “click” when they’re connected. 3. Make sure to charge your stick vacuum before first use. Refer to page 6, “Charging the Battery” for instructions. Installing the Wall Storage & Charging Station Go to BISSELL.
Charging the Battery Go to BISSELL.com/support for additional how-to videos. Before first use, make sure to fully charge your stick vacuum for 4 hours to get a full charge. To charge the battery you can plug the charger directly into the Hand Vacuum Assembly or into the Wall Storage & Charging Station. Charging with the Hand Vacuum 4 1. Plug the battery charger into the wall. 2. Plug the charger into the charging port on the back side of the hand vacuum. 3.
Using the Vacuum Looking for more guidance? Go to BISSELL.com/support for tips and 24-7 support while cleaning. ICONpet Cordless can be used as a stick vacuum, hand vacuum or for extended reach with hand vacuum + wand. 1. Press the Power Button to begin cleaning and to turn OFF the machine when finished cleaning. 2. Press the Cleaning Mode Button to toggle between the three settings: ••• Recommended for maximum suction.
Emptying the Dirt Tank More of a video person? Go to BISSELL.com/support for additional how-to videos. 1. Turn OFF your machine. Remove the Dirt Tank from the hand vacuum by sliding the latch on the front of the tank. 2. Grab the top of the tank and pull up. This will activate a wiping feature to remove debris from the mesh filter screen. 3. Fully remove the separator from the tank and tap the mesh screen on the side of the trash bin. 2 1 4. Dump dirt from the tank into the trash bin. 5.
Cleaning & Replacing the Filters Go to BISSELL.com/support for tips on maintaining and replacing your vacuum filters. Pre-Motor Filters For best cleaning performance, always clean your pre-motor filter after each use. 1. To clean the pre-motor filter, turn OFF machine and remove Dirt Tank from the hand vacuum. 2. Pull filter from the top of the tank. Remove the filter from the filter frame housing. Tap the filter against the side of a trash bin to remove dust and debris. 3.
Disposing of the Batteries Go to BISSELL.com/support for additional support and how-to videos. 1. Run the battery out. Make sure the unit is disconnected from the charger and turned OFF and the hand vacuum is disconnected from the extension wand. 2. Remove five screws from the back of the unit. 4. Disconnect and remove entire battery assembly by unplugging the two sockets from the vacuum. 5. Properly discard remainder of product. 3. Pull the bottom cover off of the back of the unit.
Troubleshooting For a comprehensive walkthrough of your product and support visit BISSELL.com/support. This guide has everything you need to get ready for first use, including setting up, using and maintaining your machine, but online you’ll find additional resources like tips and troubleshooting, videos, product registration, parts, and more. Problem Vacuum won’t pick up dirt Dirt is escaping from the vacuum Vacuum won’t charge Possible Cause Remedies Filters are dirty.
We’re Waggin’ Our Tails! Thanks to your purchase, BISSELL Pet Foundation® can help save more pets. Go to www.BISSELL.com/savepets to learn more and activate your product donation. But wait there’s more! Join us online for a comprehensive walkthrough of your product, including troubleshooting, product registration, parts and more. Go to BISSELL.com/support. REGISTER INFO VIDEOS PARTS ©2019 BISSELL Inc., Grand Rapids, Michigan All rights reserved. Printed in China.
