SPINWAVE® CORDLESS _______________ USER GUIDE 2307, 2315 SERIES
IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING YOUR SPINWAVE® CORDLESS. When using an electrical appliance, basic precautions should be observed, including the following: WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY: » Do not use outdoors. » Do not allow to be used as a toy. Close attention is necessary when used by or near children. » Do not use for any purpose other than described in this user guide. Use only manufacturer’s recommended attachments.
Thanks for buying a BISSELL® SpinWave® Cordless We love to clean and we’re excited to share one of our innovative products with you. We want to make sure your hard surface floor cleaner works as well as it does today for years to come, so this guide has tips on using, maintaining, and if there’s a problem, troubleshooting.
Get to Know Your SpinWave® Cordless 1 1 Handle 2 Digital Controls 3 Battery Status Indicator Lights 4 Clean Water Tank 5 Low Profile Foot 6 Power Spin Pads 7 Spray Nozzle 8 Charging Adapter Plug 9 Storage Tray 10 Carry Handle 11 Charging Port 2 10 3 8 4 11 9 5 7 6 Assembly WARNING Do not plug in your SpinWave® Cordless until you are familiar with all instructions and operating procedures. Insert handle into body of unit until you hear a “click”. click 4 www.BISSELL.
Cleaning Formulas WARNING To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning formulas intended for use with the hard floor device. SPINWAVE® CORDLESS FORMULAS Keep plenty of SpinWave® Cordless formulas on hand so you can clean your sealed hard floors whenever it fits your schedule. Always use SpinWave® Cordless formulas in your machine. Other solutions may harm the machine and may void the warranty.
In Use LED Display WARNING Overcharging may cause battery damage, fire or explosion. Your BISSELL® SpinWave® Cordless machine has an LED light display that will turn on when the power key is pushed to show the battery life status. All LED color is blue. TIP: Be sure to charge unit when there is less than 10% power left, one LED flashing blue.
Attaching Mop Pads: Option 1 Your BISSELL® SpinWave® Cordless may have come with two different mop pads: The Soft Touch Pad is for everyday use on delicate flooring like sealed hardwoods and laminate. The Scrubby Pad is used to power through tough, sticky messes. (2) Soft Touch Pads (2) Scrubby Pads 1 2 Your SpinWave® Cordless may have come with mop pads attached. If not, to attach mop pads, carefully lay machine down on the floor. 3 The back of the mop pad has a small dot in the center of the pad.
Attaching Mop Pads: Option 2 Your BISSELL® SpinWave® Cordless may have come with two different mop pads: The Soft Touch Pad is best for everyday use on delicate flooring like sealed hardwoods and laminate. The Scrubby Pad is best used to power through tough, sticky messes. (2) Soft Touch Pads (2) Scrubby Pads NOTE: These next steps are to help you apply the mop pads more accurately onto the machine. 2 1 Place clean mop pads upside down in the storage tray. The dot on each mop pad should be facing up.
Filling Your Clean Water Tank 2 1 3 Clean Water Tank Unscrew the cap from the Clean Water Tank. The Clean Water Tank is located on the front of the machine. Lift the Clean Water Tank straight up to remove from the machine. The Clean Water Tank has two measuring volumes depending on the amount of space you would like to clean. 4 For large area cleaning For small area cleaning a. Fill Clean Water Tank with warm tap water to the second water fill line. a.
Cleaning Sealed Hard Floors ATTENTION: This machine is designed to be used only on sealed hard floors and should not be used on carpet or rugs. For best cleaning results, sweep or vacuum the floor surface prior to using to avoid scratching or damaging floors from sharp debris. TIP 1: You may feel a slight vibration when turning on the machine if the mop pads are not aligned correctly. Wait a few seconds for the pads to adjust themselves.
Cleaning Sealed Hard Floors (cont’d) 4 3 To clean, push the SPRAY button to dispense solution. Solution will spray out of the nozzle on the front of the foot. You should hear a soft buzzing noise each time you press the SPRAY button to indicate solution being dispensed. 5 For more difficult and stuck on messes, spray solution directly on mess and line up one of the mop pads parallel to the mess.
Cleaning Your SpinWave® Cordless WARNING Do not set the machine on carpet, rug or other fabric surface when mop pad is removed as hook and loop material on foot may damage them. WARNING Do not store machine on wet mop pads as they may damage wood or other delicate floors. 2 1 To remove mop pads, simply pull pads off the hook and loop material on the bottom of the machine. Machine wash separately in warm water. Use only liquid detergents. Do not use bleach or fabric softener. Tumble dry on low.
Disposing the Batteries WARNING This product contains lithium-ion rechargeable batteries. According to Federal and State regulations, removal and proper disposal of lithium-ion batteries is required. For removal of batteries in your SpinWave® Cordless, see instructions on this page. NOTICE: Disconnecting the battery will destroy the appliance and invalidate the warranty. Before proceeding, ensure that: -The unit is disconnected from the charger. -The Clean Water Tank has been removed from unit.
Troubleshooting WARNING To reduce the risk of electric shock, turn power switch OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks. Problem Possible causes Remedies Unit is vibrating/ wobbling Mop pads are not aligned with foot. Realign the mop pads on the foot. Clean Water Tank may be empty. Refill tank. Clean Water Tank may not be seated completely. Turn power OFF. Remove and Reseat Tank. System isn’t completely primed.
Warranty This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Care by E-mail or telephone as described below. It may be necessary to obtain some of your personal information, such as a mailing address, to fulfill terms of this warranty.
Register your product today! Registering is quick, easy and offers you benefits over the lifetime of your product. You’ll receive: BISSELL Rewards Points Automatically earn points for discounts and free shipping on future purchases. Faster Service Supplying your information now saves you time should you need to contact us with questions regarding your product. Product Support Reminders and Alerts We’ll contact you with any important product maintenance reminders and alerts.
