User Manual

www.BISSELL.com
7
Filling the Clean Water/Solution Tank
Remove the tank by pulling the top
of the tank away from the unit.
1
2
Pull black tab to reveal tank opening. The
plug rotates out of the way for easy filling.
NOTE: Follow the fill lines on your Clean Water/Solution Tank to add the correct
amount of hot tap water (140 degrees F / 60 degrees C MAX) and portable
machine formula. Note: There are dierent directions on the tank for small and
large messes. DO NOT BOIL OR MICROWAVE WATER.
Add water to the indicated fill line on
the solution tank.
3
4
Replace the plug by rotating into place
and pressing gently onto tank.
Replace tank by lining the bottom with
indentations on machine. Push the top of
the tank into place until you hear a “click”.
5
6
Add formula to the indicated fill line
on the solution tank. Add 1 ounce of
any BISSELL® Boost, if desired.
FORMULA BOOST