JETSCRUB PET 2526, 2529, 2527 SERIES Go online for a comprehensive walkthrough of your new purchase! This guide features everything you need to get ready for first use, including setting up, using and maintaining your machine, but join us online for a comprehensive walkthrough. Our online support includes tips and troubleshooting, videos, product registration, parts, and more. Go to BISSELL.com/support. BISSELL.
IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING YOUR APPLIANCE. When using an electrical appliance, basic precautions should be observed, including the following: WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK »» Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces. OR INJURY: »» Connect to a properly grounded outlet only.
We’re so happy you chose the JetScrub Pet. We put this guide together to help you set up, use and maintain your JetScrub Pet. We’ve also included some tips we think will come in handy when you first start using your JetScrub Pet, so let’s get started! For a comprehensive walkthrough of your product go to BISSELL.com/support. Warranty................................................................................ 2 Cleaning Your Stairs.......................................................
What’s in the Box? Standard accessories may vary by model. To identify what should be included with your purchase, please refer to the “Carton Contents” list located on the carton top flap. Additional accessories may be purchased at BISSELL.com.
Cleaning Formulas FInd more formulas at BISSELL.com. Keep plenty of BISSELL formulas on hand so you can clean whenever it fits your schedule. Always use genuine BISSELL formulas in your machine. Other formulas may harm the machine and void the warranty. Do not use Hard Floor Formula on area rugs or carpet.
Filling the Clean Water Tank Go to BISSELL.com/support for additional how-to videos. Note: Fill with warm (140°F/60°C MAX) tap water and add the appropriate BISSELL® formula. Do not use boiling water. Do not heat water or tank in microwave. 1. The Clean Water Tank is on the back of the machine. 2. Lift the tank straight up to remove from the machine. 3. Unscrew the cap from the Clean Water Tank. 4. Fill the Clean Water Tank with water and formula.
Cleaning Carpets and Area Rugs Go to BISSELL.com/support for how-to videos and cleaning tips. Tips Before Cleaning • If cleaning an entire room, consider moving your furniture to another area. • Use a dry vacuum cleaner over area before using your deep cleaner. • Pretreat stains with BISSELL Pretreat to improve performance on tough, set-in stains.. • Before cleaning area rugs, check the manufacturer’s tag and test an inconspicuous spot on the rug for colorfastness. Don’t use on silk or delicate rugs.
Cleaning Your Stairs Go to BISSELL.com/support for additional how-to videos. 1. Ensure you are using the Carpet Nozzle and Brush Roll for carpeted stairs and the Hard Floor Nozzle and Brush Roll for hard floor stairs. 2. Plug machine into a properly grounded outlet. 3. Press button to retract handle. 4. Turn the machine ON and OFF by pressing Deep Clean or Express Clean. 5. Hold machine by placing one hand on the Carry Handle under the Dirty Water Tank and one on the Upper Handle of the machine. 6.
Emptying the Dirty Water Tank Go to BISSELL.com/support for a full list of how-to videos. 1. To release Dirty Water Tank, press down on recessed button on the top of the tank. Tilt the tank slightly toward you. Grab the handle and tank with both hands and pull the Dirty Water Tank up and away to remove. 4. Rinse the inside of the Dirty Water Tank. Rinse the float located at the bottom of the top of the Dirty Water Tank.
Cleaning & Replacing the Brush Roll and Chamber Go to BISSELL.com/support for additional maintenance tips for your machine. 1. Grasp Brush Roll Nozzle on both sides and pull upward to remove. 2. Pull Brush Roll out by grabbing the Brush Roll tab and pulling upward. 3. Rinse your brush roll and brush roll nozzle with warm water. The nozzle Clean Out tool can be used to remove hair and debris. Note: These parts are not dishwasher or automatic washing machine safe.
Using the Storage Tray (select models) Go to BISSELL.com/support for feature videos of your machine. 1. Grasp Brush Roll Nozzle at the front of the nozzle and pull upward to remove. 2. Pull Brush Roll out by grabbing the Brush Roll tab and pulling upward. 4. Replace Brush Roll by inserting the Brush Roll end into the right side of the foot. Then lock the pull tab into place by pressing downward. 5. Replace the Brush Roll Nozzle by first lining up the Brush Roll Nozzle tabs with the edges of the foot.
We’re Waggin’ Our Tails! Thanks to your purchase, BISSELL Pet Foundation® can help save more pets. Go to www.BISSELL.com/savepets to learn more and activate your product donation. But wait, there’s more! Join us online for a comprehensive walkthrough to your new product, including troubleshooting, product registration, parts and more. Go to BISSELL.com/support. REGISTER INFO VIDEOS PARTS ©2019 BISSELL Inc., Grand Rapids, Michigan All rights reserved. Printed in China.