PET HAIR ERASER® TURBO REWIND 2790 SERIES Go online for a comprehensive walkthrough of your new purchase! This guide has everything you need to get ready for first use, including setting up, using and maintaining your machine, but online you’ll find additional resources like tips and troubleshooting, videos, product registration, parts, and more. Go to support.BISSELL.com.
IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING YOUR APPLIANCE. Always connect to a polarized outlet (one slot is wider than the other). Unplug from outlet when not in use and before conducting maintenance. When using an electrical appliance, basic precautions should be observed, including the following: WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY: » Do not leave vacuum cleaner when it is plugged in. Unplug from outlet when not in use and before servicing.
We’re so happy you chose the Pet Hair Eraser Turbo Rewind®. We put this guide together to help you set up, use and maintain your vacuum. We’ve also included some tips we think will come in handy when you first start using your vacuum, so let’s get started! For a comprehensive walkthrough of your product, go to support.BISSELL.com. Warranty..................................................................................2 Above-Floor Cleaning....................................................
What’s in the Box? Standard accessories may vary by model. To identify what should be included with your purchase, please refer to the “Carton Contents” list located on the carton top flap. Vacuum Base Upper Handle & Extension Wand Stretch Hose LED Lighted Crevice Tool Pet TurboEraser® Tool 2-in-1 Pet Brush Optional Febreze Filter Certain trademarks used under license from The Procter & Gamble Company or its affiliates.
Assembly Go to support.BISSELL.com for assembly videos. 1. Slide end of wand into top of base. It will “click” when inserted correctly. 2. Attach Stretch Hose by lining the tabs on the circular cuff with the notches on the back of the handle. Twist clockwise to lock hose into place. 3. Press the Dirt Tank Release Button and pull tank away from the vacuum to remove. 4. Attach end of hose to vacuum by sliding square cuff into the bracket below the Power Switch. 5.
Using Your Vacuum For additional ways to use your vacuum’s features, check out support.BISSELL.com. 1. Turn the Power Switch ON. Optional: Turn the Brush Roll Switch ON to run the PowerBrush for carpet cleaning. Brush Roll is ON when light switch is illuminated. Turn the Brush Roll Switch OFF when vacuuming hard or delicate surfaces like hardwood, tile, small area rugs, or frieze carpets with long delicate fibers or threads. 2. Step gently on base and pull the handle back to recline.
Automatic Cord Rewind If you have trouble with this feature, see our troubleshooting videos on support.BISSELL.com. 1. To plug in your vacuum, gently pull the cord out, being careful not to pass the red mark on the cord. Plug the cord into an outlet. 2. When you’re done cleaning, unplug the vacuum. Hold the plug and press the Automatic Cord Rewind Button to slowly retract the cord. 3. If it doesn’t fully retract at first, pull some of the cord out and press the button again.
Above-Floor Cleaning Visit support.BISSELL.com to see all the ways you can use your vacuum’s tools. 1. Clean hard-to-reach spaces with the Quick Release Extension Wand. Push the release button to remove and attach desired tool. 8 BISSELL.com 2. The Stretch Hose can be removed from the extension wand. To do so, twist circular hose cuff counter-clockwise and remove from handle. 3.
Emptying the Dirt Tank For additional maintenance steps, visit support.BISSELL.com. 1. Press the Dirt Tank Release Button and grab the handle to pull the Dirt Tank away from vacuum. 2. Hold the Dirt Tank over a trash bin and press the Empty Button. Once emptied, snap bottom back into place. 3. Return the Dirt Tank to the vacuum by securing the bottom in place first and then pushing back until you hear a “click”.
Cleaning and Replacing the Filters Visit BISSELL.com to find replacement filters. Pre-Motor Filter 1. Press the Dirt Tank Release Button and pull away from vacuum. 2. Twist tank cover to the unlock position then pull up on handle. 3. Remove Pre-Motor Filter from top of Dirt Tank lid by pulling out. 5. Return Pre-Motor Filters to the top of the Dirt Tank, placing the thick foam filter in last. 6. Put tank cover back on and twist to lock. 2.
Protecting the Vacuum’s Motor For more assistance with your vacuum’s motor protection, visit support.BISSELL.com. There is an internal thermal protector in your vacuum that protects it from overheating. It controls the main vacuum motor only, not the brush motor. When it activates, the main motor will stop. The front lights and Brush Roll will stay on but there won’t be any suction. If this happens, follow these steps: 1. Turn vacuum OFF and unplug from electrical outlet. 2.
We’re Waggin’ Our Tails! BISSELL® proudly supports BISSELL Pet Foundation® and its mission to help save homeless pets. When you buy a BISSELL product, you help save pets, too. We’re proud to design products that help make pet messes, odors and pet homelessness disappear. Visit BISSELLsavespets.com to learn more. But wait, there’s more! Join us online for a complete guide to your new product, including troubleshooting, product registration, parts and more. Go to support.BISSELL.com.
