Owner's Manual

ManualsBrandsBissell ManualsAppliancesCleanView Pet Slim Corded Stick Vacuum

CLEANVIEW

PET SLIM

CORDED VACUUM

Series 2831

Product Overview

1. Hand Vacuum

2. Power Switch

3. Tank Release Button

4. Dirt Tank

5. Hand Vacuum

Release Button

6. Extension Wand

7. Foot Release Button

8. Tangle-Free Brush Roll

9. Motorized Floor Cleaning Foot

10. Cord Wrap

11. Foot Hose

Go online for a comprehensive walkthrough

of your new purchase!

This guide has everything you need to get ready for first use, including

setting up, using and maintaining your machine, but online you’ll find

additional resources like tips and troubleshooting, videos, product

registration, parts, and more. Go to support.BISSELL.com.

What’s in the Box? .............................................................2

Assembly .............................................................................. 3

Installing the Wall Mount & Tool Storage Station ... 3

Installing the Optional Febreze Filter .........................3

Using the Vacuum ..............................................................4

Attaching Tools for Hand Vac Use ............................... 4

Emptying the Dirt Tank .................................................... 5

Cleaning & Replacing the Filter .....................................6

Maintaining the Pet TurboEraser® Tool.......................6

Maintaining the Brush Roll ..............................................7

Troubleshooting .................................................................8

Warranty ............................................................................... 8

Summary of content (8 pages)

PAGE 1
CLEANVIEW® PET SLIM CORDED VACUUM Series 2831 What’s in the Box?.............................................................. 2 Assembly............................................................................... 3 1 Installing the Wall Mount & Tool Storage Station.... 3 Installing the Optional Febreze Filter.......................... 3 Using the Vacuum............................................................... 4 Attaching Tools for Hand Vac Use................................
PAGE 2
IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING YOUR VACUUM. When using an electrical appliance, basic precautions should be observed, including the following: WARNING » Use extra care when cleaning on stairs. » Do not use to pick up flammable or combustible materials (lighter fluid, gasoline, kerosene, etc.) or use in areas where they may be present.
PAGE 3
Assembly Go to support.BISSELL.com for assembly videos. 1. Connect the Extension Wand to Motorized Floor Cleaning Foot. You’ll hear a “click” when they’re connected. 2. Connect the Hand Vacuum to the Extension Wand. You’ll hear a “click” when they’re connected. 3. Wrap cord on the side of the product where the cord clips are located. Installing the Wall Mount & Tool Storage Station Go to support.BISSELL.com for more tips and video instructions. 1. Insert tool holder on the side of the wall mount. 2.
PAGE 4
Using the Vacuum Looking for more guidance? Go to support.BISSELL.com for tips and 24-7 support while cleaning. Pet Hair Eraser® Slim Corded can be used as a stick vacuum, hand vacuum or for extended reach with the Hand Vacuum and Extension Wand. 1. Slide the Power Switch down to begin cleaning and back up to turn the machine OFF when finished cleaning. 2. Choose your cleaning mode: Hard Floor Mode Slide the Power Switch down 1 notch.
PAGE 5
Emptying the Dirt Tank More of a video person? Go to support.BISSELL.com for additional how-to videos. 1. Turn OFF your machine. Remove the Dirt Tank from the Hand Vacuum by pressing the Tank Release Button on the front of the tank. 2. Grab the middle grip from the filter and pull up. This will activate a wiping feature to remove debris from the mesh filter screen. Twisting the grip will remove the filter only. 3.
PAGE 6
Cleaning & Replacing the Filter Go to support.BISSELL.com for tips on maintaining and replacing your vacuum filter. For best cleaning performance, always clean your filter after each use. 1. Turn machine OFF. To clean the filter, remove Dirt Tank by pressing the Tank Release Button and sliding the tank out. 2. Twist top to remove filter frame from the separator. Remove the filter from the filter frame housing. Tap the filter against the side of a trash bin to remove dust and debris. 3.
PAGE 7
Maintaining the Brush Roll Go to support.BISSELL.com for tips on maintaining and replacing your Brush Roll. 1. Turn the machine OFF and press the Foot Release Button to disconnect the Motorized Cleaning Foot. 2. Twist the bottom screws with a coin to remove bottom cover. 4. Reattach Brush Roll by inserting into the belt and pressing in to place. 5. Attach and secure bottom cover. 3. Remove the Brush Roll cover and clear any debris from Brush Roll. BISSELL.
PAGE 8
Troubleshooting For a comprehensive walkthrough of your product and support visit support.BISSELL.com. This guide has everything you need to get ready for first use, including setting up, using and maintaining your machine, but online you’ll find additional resources like tips and troubleshooting, videos, product registration, parts, and more. Problem Vacuum won’t pick up dirt Dirt is escaping from the vacuum Brush Roll doesn’t rotate Possible Cause Remedies Filter is dirty.