User Manual

4 BISSELL.com
1. Remove the Clean Water
Tank by lifting straight up and
away from the machine.
2. Unscrew the cap at the
bottom of the tank.
3. Fill with hot (140°F/60°C
MAX) tap water to the WATER
line. Do not use boiling water.
Do not heat water in the
microwave.
4. Add BISSELL formula to the
FORMULA line.
5. Replace and tighten the
cap.
6. Replace the tank on the
machine until it “clicks” into place.
Filling the Clean Water Tank
For additional tips and tricks on filling your Clean Water Tank visit support.BISSELL.com.
1. Plug into a proper outlet. 2. Turn the machine ON by
pressing the power switch.
3. Step on the recline pedal
located below the power switch.
Cleaning Your Carpet
For additional carpet cleaning tips, head to support.BISSELL.com.
Tips Before Cleaning
• If cleaning an entire room, consider moving your furniture to another area.
• Use a dry vacuum cleaner over area before using your deep cleaner.
• Remove any large, solid debris before wet cleaning.
• Pretreat stains with BISSELL® Pretreat to improve performance on coffee stains and ground-in dirt.
CONTINUED ON NEXT PAGE