Instructions

ManualsBrandsBissell ManualsBuilding Technology & Smart LivingSpinwave Robot cleaner

What’s in the Box? .......................................................... 2

Docking and Charging Your Robot ..................... 2

Connecting to the App ................................................ 3

Automatic Cleaning ........................................................ 3

Dry Vacuum Mode .......................................................... 4

Mop Mode ............................................................................. 5

Cleaning the Brush Roll ................................................7

Removing and Cleaning the Caster Wheel ....7

Replacing the Edge Cleaning Brushes.............. 8

Cleaning the Sensors .....................................................8

Replacing the Battery ................................................... 9

Troubleshooting ..............................................................10

Storing Your Robot ....................................................... 10

SPINWAVE® ROBOT

MODEL 2931N

Product Overview

1. Tank Release Button

2. Power Switch

3. Mop Pads

4. Bumper

5. Start/Pause Button

6. Edge Cleaning Brushes

This guide features everything you need to get ready for first use,

including setting up, using and maintaining your machine.

For additional support, download the BISSELL Connect App.

Summary of content (10 pages)

PAGE 1
.A T. 18 7 6 U.S . HO M ES MODEL 2931N S RT SPINWAVE® ROBOT NING E LEA XP E EC What’s in the Box?........................................................... 2 Docking and Charging Your Robot...................... 2 Connecting to the App................................................. 3 Automatic Cleaning......................................................... 3 Dry Vacuum Mode...........................................................4 Mop Mode......................................................
PAGE 2
What’s in the Box? Formula Water BISSELL® SpinWave® Robot with Dirt Bin Mop Tank with Mop Pads Docking Station Docking Tray Power Adapter Cleaning Tool (2) Trial-Size Formulas Replacement Edge Cleaning Brushes (2) Extra Mop Pads Extra Filters Docking and Charging Your Robot Note: The Docking Station & Docking Tray must be installed on a hard surface. The robot’s soft surface sensors prevent it from cleaning carpets and area rugs in Mop Mode.
PAGE 3
Connecting to the App Downloading the BISSELL Connect App means you can change your robot’s cleaning mode, start, pause, or stop your robot, schedule cleanings, view notifications, track your cleaning history, and troubleshoot all from the palm of your hand. 1. In the App or Google Play Store search “BISSELL Connect” and download. 2. Make sure you’re near your WiFi router before turning the robot ON (I). 3.
PAGE 4
Dry Vacuum Mode Manual Cleaning In Dry Vacuum Mode, your robot will clean using a combination of dual Edge Cleaning Brushes, a rotating Brush Roll and powerful suction to clean multiple floor types in your home. x2 2. When finished, press the Start/Pause Button again to stop the robot. 3. Return the robot to the dock. Press the Start/Pause Button twice. The light ring will flash white as it finds its way back. 1. Turn the Power Switch OFF. Press the button on top of the Dirt Bin and pull to remove. 2.
PAGE 5
Mop Mode Filling Your Mop Tank In Mop Mode, your robot will clean using dual rear rotating Mop Pads combined with a BISSELL formula to clean your home’s hard floors. Keep plenty of BISSELL® formulas on hand so you can clean whenever it fits your schedule. Always use genuine BISSELL formulas in your machine. Other formulas may harm the machine and void the warranty. While mopping, your robot will also sweep and collect a limited amount of dry debris for a complete cleaning experience.
PAGE 6
Mop Mode (continued) Maintaining the Mop Pads and Debris Trap While in Mop Mode, your robot can sweep up a limited amount of dry debris, so be sure to empty the trap after each clean. Formula Water 1. Turn the Power Switch OFF. Press the button on top of the Mop Tank and pull to remove. Place tank upside down on a soft surface. 2. Firmly pull up on the Mop Pads to remove from Mop Pad Drivers. Replace Mop Pads if damaged. 4. To reattach, use the middle hole on the pads to align with the driver. 5.
PAGE 7
Cleaning the Brush Roll Check out the BISSELL Connect App for tips and videos on Brush Roll Maintenance. 1. Turn the Power Switch OFF. Pinch the tabs on the brush guard inward and pull to remove. Lift to remove the Brush Roll. 2. Clean the Brush Roll with the Cleaning Tool. 3. Replace the Brush Roll and brush guard. Note: The Brush Roll has two different end pieces. Ensure the squareshaped end piece is inserted into the square-shaped port.
PAGE 8
Replacing the Edge Cleaning Brushes Occasionally, the Edge Cleaning Brushes need to be cleaned to work more effectively. Once removed, they can be rinsed or soaked in water. Be sure they are completely dry before returning to the machine. 1. Turn the Power Switch OFF. Use a Phillips-head screwdriver to remove the screw. Pull up on the base of the brush. 2. Push the brush directly onto the holder. Replace the screws with a Phillips-head screwdriver.
PAGE 9
Replacing the Battery 1. Turn the Power Switch OFF. 2. Use a Phillips-head screwdriver to remove the two screws and battery cover. 3. Remove the battery and disconnect. 4. Note the tape location that covers over the connectors. Remove the tape by unwrapping, then separate the connectors. 5. Connect the new battery. Wrap the tape to the original location to completely cover the connectors and terminals. Do not remove the plastic shrink sleeve from the battery pack. 6.
PAGE 10
Troubleshooting This guide has everything you need to get ready for first use, including setting up, using and maintaining your machine, but online you’ll find additional resources like tips and troubleshooting, videos, product registration, parts, and more. Problem Streaking or water spots when mopping Possible Cause Remedy Too much water is being used. Choose a lower water level in the BISSELL Connect App. Mop Pads are dirty. Attach clean Mop Pads. Debris is trapped on bottom of robot.