USER GUIDE PROHEAT LIFT-OFF® 24A4, 30K7, 66E1, 80X9 SERIES
Important Safety Instructions Read all instructions before using your DEEP CLEANER. When using an electrical appliance, basic precautions should be observed, including the following: WARNING To reduce the risk of fire, electric shock, or injury: » Connect to a properly grounded outlet only. See grounding instructions. Do not modify the 3-prong grounded plug. » Do not leave appliance when it is plugged in. Unplug from outlet when not in use and before servicing. » Do not expose to rain, store indoors.
Thanks for buying a BISSELL deep cleaner We’re glad you purchased a BISSELL deep cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your BISSELL deep cleaner is well made, and we back it with a limited two-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Care department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
Product View 1 Upper Handle 2 Heat Indicator Light 3 Carry Handle 4 Specialty Tool (tools vary by model) 5 Formula & Water Tank 6 Power Button 7 Power Cord 8 Dirty Tank 9 Flex Hose 10 Quick Release™ Cord Wrap 1 11 Portable Spot Cleaning Release Pedal 12 EdgeSweep® Brushes 13 Removeable Nozzle 14 Spray Trigger 15 Tool Storage 16 Support Handle 17 Hose Secure Latch 18 Recline Pedal 14 2 6 3 4 5 7 8 15 9 10 16 11 12 13 17 18 4 www.bissell.com 800.237.
Assembly WARNING Do not plug in your deep cleaner until you are familiar with all instructions and operating procedures. Your deep cleaner comes in two easy to assemble components: 1. Upper handle 2. Portable spot cleaner/Base 1. 2. The only tool you will need to assemble your cleaner is a Phillips screwdriver. 1. Slide the upper handle onto the body of the machine by guiding the 2 posts on the body into the opening on the upper handle. 2.
Assembly Cleaning fluid WARNING Keep plenty of genuine BISSELL 2X formula on hand so you can clean and protect whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas. Non-BISSELL cleaning solutions may harm the machine and will void the warranty.
Operations Special features Innovative cleaning technology This innovative deep cleaner offers two machines in one. The upright deep cleaner uses brushes and cleaning formula to maximize cleaning. The portable spot cleaner detaches to clean tough spots and stains and hard to reach areas. Heatwave Technology® This deep cleaner features Heatwave Technology to help maintain the temperature of the hot tap water you put in it to provide constant heat as you clean.
Operations Before you clean 1. Move furniture to another area if cleaning an entire room (optional). 2. For best results, vacuum area with a dry vacuum cleaner thoroughly before deep cleaning. 3. Pretreating (optional): a. Pretreating is recommended to improve cleaning effectiveness for heavily soiled carpet in high traffic areas such as entryway and hallways. Attention Some Berber carpets have a tendency to fuzz with wear.
Operation Empty dirty tank 1. When the dirty tank reaches the “FULL” line on the tank, it is time to empty. 3. 2. 2. Remove the dirty tank and carry it to a utility sink, toilet or outside (where you will dispose of the dirty water). 3. To unlock the dirty tank lid, rotate the handle over the back of the tank. Remove lid and pour out dirty water. Rinse out the dirty tank to remove any debris. 4. 5. 4. Replace the top of the tank and rotate the handle forward to lock in place on front of tank. 5.
Operations Tip 3. The inside of the end caps can be wiped out with a clean paper towel, or, for a more thorough clean, the end caps can be taken off and rinsed clean. 4. Any loose hair or debris can be pulled from the brush rolls and thrown away. For a more thorough clean, follow directions on page 15 for removal of brush rolls. Your machine is now ready to be stored. » For best results, empty, rinse, and dry both tanks before storing. » Let all parts dry completely and replace onto machine.
Operations 2. Using the brush on the tool, gently scrub the area to be cleaned. 3. Apply downward pressure on the tool and pull it toward you. The suction will remove the dirt and cleaning solution. Continue until no more dirt can be removed. Cleaning with Deep Reach™ Tool 1. 1. Set tool on soiled surfaces and press the trigger to spray solution onto the soiled area to be cleaned. 2. Slowly move the tool back and forth over the soiled surface, keeping the tool in contact with the carpet. 3. 3.
Operations Empty dirty tank Follow the instructions under Empty dirty tank section on page 9 of the Upright cleaning mode section. Cleaning portable machine 1. Remove and rinse the tools in clean, running water. Dry and replace in the tool storage provided. 2. It is recommended that you suction clean water from a bowl to rinse out the hose. Then lift end of hose and stretch out to ensure all water is cleared from hose. 3. Coil flex hose around the hose wrap and secure with latch. 4.
Maintenance & Care Machine care (check regularly) WARNING Cleaning suction gate To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks. The suction gate automatically diverts air when the portable deep cleaner is detached. This should be checked and cleaned regularly for any dirt and debris. 1. Step on the pedal and remove the portable spot cleaner. Remove dirty tank. 2. 2.
Maintenance & Care Small belt removal and replacement (as needed) 1. Turn off the machine and unplug it from the outlet. Remove portable spot cleaner. WARNING To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks. Occasional replacement of one or both belts may become necessary. If that is needed, please follow the instructions below. 2. 2.
Maintenance & Care Brush removal and large belt replacement (as needed) WARNING To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks. Brushes can be removed for cleaning or replacement as needed. 1. Follow small belt removal Instructions on page 14 items 1-7. 2. Remove brush rolls by pulling them off of the metal rods. Be careful not to lose the small washer at each end of the brush rolls. 2. 3.
Troubleshooting Problem Heater indicator light does not illuminate Reduced spray OR no spray DirtLifter PowerBrush does not turn Loss of suction power 16 WARNING To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks.
Troubleshooting Please do not return this product to the store. WARNING To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks. Other maintenance or service not included in the manual should be performed by an authorized service representative. Thank you for selecting a BISSELL product. For any questions or concerns, BISSELL is happy to be of service. Contact us directly at 1-800-237-7691.
Accessories These items are available for your BISSELL ProHeat Lift-Off deep cleaner. Call 1-800-237-7691 or visit www.BISSELL.com Part # Part Name Part # Part Name 203-6651 3” Tough Stain Tool 203-6652 Powered TurboBrush® Hand Tool 203-6653 4” Upholstery Tool 203-6654 6” Stair Tool 203-7885 Spraying Crevice Tool 203-7412 Deep Reach Pet Tool 1603650 3-in-1 Stair Tool 62E5-2 2X Deep Clean & Protect Formula with Scotchgard™ Protection 60 oz.
Warranty Service Limited Two-Year Warranty Contact BISSELL Consumer Care to locate a BISSELL Authorized Service Center in your area. If you need information about repairs or replacement parts, or if you have questions about your warranty, contact BISSELL Consumer Care. This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state.
Register your product today! Registering is quick, easy and offers you benefits over the lifetime of your product. You’ll receive: BISSELL Rewards Points Automatically earn points for discounts and free shipping on future purchases. Faster Service Supplying your information now saves you time should you need to contact us with questions regarding your product. Product Support Reminders and Alerts We’ll contact you with any important product maintenance reminders and alerts.
