User Guide

Empty dirty tank
Follow the instructions under Empty dirty
tank section on page 9 of the Upright
cleaning mode section.
Cleaning portable machine
1. Remove and rinse the tools in clean,
running water. Dry and replace in the tool
storage provided.
2. It is recommended that you suction clean
water from a bowl to rinse out the hose. Then
lift end of hose and stretch out to ensure all
water is cleared from hose.
3. Coil flex hose around the hose wrap and
secure with latch.
4. Check suction gate and if it appears dirty,
follow steps 1-4 under Cleaning Suction Gate
on page 13.
Replacing portable machine on base
1. Align the product with the cord side on the
left and hose side on the right.
2. Push down the portable spot cleaner until
both sides click securely into place. Test the fit
by pulling up on the carry handle to make sure
it is secure.
To further check if the portable spot cleaner is
secure, plug in and turn on to verify that the heat
indicator light is illuminated. If the heat indicator
light does not illuminate, release the pod and
re-secure by pushing firmly until both sides snap
into place.
Operatis
www.BISSELL.com 800.237.7691
12
1.
Cord
side
Hose
side