User Guide

Mainnce & Care
www.BISSELL.com 800.237.7691
15
2.
4.
6.
8.
3.
5.
7.
Brush removal and large belt
replacement (as needed)
Brushes can be removed for cleaning or
replacement as needed.
1. Follow small belt removal Instructions on
page 14 items 1-7.
2. Remove brush rolls by pulling them off of
the metal rods. Be careful not to lose the
small washer at each end of the brush rolls.
3. Re-attach the large belt to the grooves on
the end of the new brush rolls. If the belt is
damaged, replace with a new belt.
4. Place cleaned or new brush rolls back
onto the rods. Make sure one washer is on
each end of the rollers prior to sliding onto
the rod. Be sure the brush is seated
completely on the rod.
5. Replace small belt over grooves in back
roller and metal cog.
6. Replace pivot arm and secure with
silver screw.
7. Re-attach end cap by tightening with
the (3) black screws.
8. Return front nozzle to front of unit, by
latching from underneath and then securing
with 3 screws.
9. Follow step number 8 & 9 on page 14.
If you have any questions or are having
trouble installing or replacing your belt(s) or
brushes, please call BISSELL Consumer Care.
WARNING
To reduce the risk of electric shock, turn power switch
o and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.