User Guide
Operatis
Before you clean
1. Move furniture to another area if cleaning an
entire room (optional).
2. For best results, vacuum area with a dry vacu-
um cleaner thoroughly before deep cleaning.
3. Pretreating (optional):
a . Pretreating is recommended to improve
cleaning effectiveness for heavily soiled
carpet in high traffic areas such as entryway
and hallways.
b. BISSELL Stain PreTreat Spray the
BISSELL Stain PreTreat formula onto heavy
traffic areas, soiled areas or stains.
Allow to penetrate for at least 3 minutes.
Clean as normal, using the deep cleaner in
upright mode, following the instructions
below.
Upright cleaning mode
Filling formula & water tank
1. Remove tank from the base of the machine
by lifting up tank carry handle.
NOTE: This tank was designed with a flat
bottom so it can be easily filled.
2. Unscrew the black cap and remove bottle
insert.
3. Fill tank with hot (140°F/60°C MAX) tap water
to the water fill line. Add two ounces of BISSELL
2X formula to the tank. *Do not boil or microwave.
4. Replace the bottle insert in the tank and
tighten the black cap. Replace the tank on the
deep cleaner.
Cleaning
1. Plug into a proper outlet and press the
power button.
2. While pressing the trigger, make one slow
forward wet pass and another one back.
3. Release the trigger and make one slow
forward and backward pass over the same
area. Repeated passes will help aid in dry time.
4. Continue passes until cleaning area is
complete.
NOTE: Your machine may be equipped with a
circuit breaker that will automatically shut off
the brush if a large or loose object is caught
in the brush roll. If that happens, be sure to
unplug your machine, remove the foreign
object and then plug the machine back in to
reset the circuit breaker.
www.BISSELL.com
800.237.7691
8
ATTENTION
Some Berber carpets have a tendency to fuzz with wear.
Repeated strokes in the same area with an ordinary
vacuum or deep cleaner may aggravate this condition.
Please see Stain Removal instructions on page 11.
» Thorough vacuuming before
deep cleaning wll prevent
early clogging of the lint trap.
Tip
1.
3b.
2.
CAUTION
Do not overwet. Take care not to run over loose
objects or edges of area rugs. Stalling brush may
result in premature belt failure.