User Guide

Empty dirty tank
1. When the dirty tank reaches the “FULL” line on
the tank, it is time to empty.
2. Remove the dirty tank and carry it to a utility
sink, toilet or outside (where you will dispose of
the dirty water).
3. To unlock the dirty tank lid, rotate the handle
over the back of the tank. Remove lid and pour
out dirty water. Rinse out the dirty tank to
remove any debris.
4. Replace the top of the tank and rotate the han-
dle forward to lock in place on front of tank.
5. Before replacing the tank on the machine,
wipe debris from red filter.
Cleaning your machine
1. Flush out machine of any remaining
residual solution.
a. Fill the formula & water tank with hot tap
water and turn on your machine.
b. Recline handle and press the spray
trigger for about 15 seconds while making
forward and backward passes on carpet.
Continue without pressing the trigger until
there is no more water being suctioned up.
c . Turn off the machine and wrap the
power cord. Make sure the dirty tank and
the formula & water tank are emptied,
rinsed, and dried before the next use.
d. Before you replace tank, clean
all debris from red filter screen.
2. Rinse the front nozzle of any dirt and debris.
a . Remove the portable spot cleaner from
the base of the machine.
b . Unscrew three screws with Phillips
screw driver and remove nozzle.
c . Rinse the nozzle out at the faucet.
d . Place the nozzle back onto the machine
by hooking the tabs into the holes on the
bottom sides of the machine. Secure with
screws.
Operati
www.BISSELL.com 800.237.7691
9
2.
5.
3.
4.
2b.
WARNING
To reduce the risk of electric shock, turn power switch
o and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.