Series 3139
Welcome to BISSELL®
Safety Instructions WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY: » Plastic film can be dangerous. To avoid danger of suffocation, keep away from children. » Do not plug in your air purifier UNTIL you are familiar with all instructions and operating procedures. » To reduce the risk of electrical shock, turn power switch OFF and disconnect polarized plug from electrical outlet BEFORE performing maintenance or troubleshooting checks. » Use indoors only.
Getting Started For additional support videos and information, visit support.BISSELL.com. 1. Remove the air purifier from its box and flip the air purifier over. Twist the bottom cover counter-clockwise to the unlocked position. 2. Remove the base cover to access and remove the filter. 3. Remove the filter from its protective plastic bag. 4. Place the filter back into the air purifier with the Genuine BISSELL® Filter sticker facing up. 5.
Control Panel 6 Power Button Night Light Button Turns the air purifier ON/OFF. Press the Night Light Button to choose between low light, high light or off. Fan Speed Settings Filter Reset Button Press the +/- buttons to adjust fan speed. The MYair™ PRO has 3 fan speeds: low, medium, and high. Lights up red when the filter needs to be changed (see page 7).
Filter Replacement Note: Filter life varies based on run time and existing air conditions. It is recommended to replace the filter once every 4 months. 1. To remove the base cover, grip the center of the base and twist counter-clockwise to the unlocked position. 2. Remove the base cover to access the filter. Remove the dirty filter. 3. Remove your new filter from its protective plastic bag. 4. Insert the new filter with the Genuine BISSELL® Filter sticker facing up.
Troubleshooting Below are some of the issues you may run into. If you don’t see the issue you’re experiencing below, visit support.BISSELL.com. Problem Airflow is significantly reduced Air purifier is making unusual noise Possible Cause Remedies Filter is in protective plastic bag. Remove filter from plastic bag and reinstall. Fan speed is low. Press the + button to increase fan speed. Filter needs to be replaced. Replace the filter (see page 7). Filter is in protective plastic bag.
We’re Waggin’ Our Tails! BISSELL® proudly supports BISSELL Pet Foundation® and its mission to help save homeless pets. When you buy a BISSELL product, you help save pets, too. We’re proud to design products that help make pet messes, odors and pet homelessness disappear. Visit BISSELLsavespets.com to learn more. Love your BISSELL® product? Don’t keep it a secret. Let us, and millions of others, know what you think! Leave your star-rating on BISSELL.com. ©2021 BISSELL Inc. All rights reserved.
Nous frétillons de joie! BISSELL® appuie fièrement BISSELL Pet Foundation® et sa mission de sauver des animaux sans foyer. Lorsque vous achetez un produit BISSELL, vous contribuez aussi à sauver des animaux. Nous sommes fiers de concevoir des produits qui aident à faire disparaître les saletés et les odeurs laissées par les animaux et ainsi à réduire le nombre d’animaux sans foyer. Visitez le BISSELLsavespets.com pour en savoir plus. Vous aimez votre produit BISSELL®? Ne gardez pas cela secret.
9
Dépannage Vous trouverez, ci-dessous, certains des problèmes que vous pourriez rencontrer. Si le problème éprouvé n’y est pas indiqué, rendez-vous sur support.BISSELL.com. Problème Le débit d’air est considérablement réduit. Le purificateur d’air émet un bruit inhabituel. Odeur étrange provenant du purificateur d’air. Le purificateur d’air ne se met pas en marche. Causes possibles Solutions Appuyer sur le bouton + pour augmenter la vitesse du ventilateur. La vitesse du ventilateur est faible.
Remplacement du filtre Remarque: La durée de vie du filtre varie selon l’utilisation et les conditions d’air existantes. Il est recommandé de remplacer le filtre une fois tous les 3 mois. 5. Aligner la flèche de déverrouillage du couvercle de la base avec la flèche du purificateur d’air. Faire pivoter le couvercle de la base dans le sens des aiguilles d’une montre jusqu’à ce qu’il s’enclenche en position verrouillée. 4.
Panneau de commande S’allume en rouge lorsque le filtre doit être changé (voir page 7). Appuyer sur les touches +/- pour régler la vitesse du ventilateur. Le ventilateur de l’appareil MYair™ PRO a trois vitesses : faible, moyenne et élevée. Bouton de réinitialisation du filtre Réglages de la vitesse du ventilateur Appuyer sur le bouton « Night Light » pour choisir entre une lumière faible, forte ou éteinte. Allume et éteint le purificateur d’air.
Pour commencer Pour des vidéos d’aide et des informations supplémentaires, visiter support.BISSELL.com. 5. Remettre le couvercle de la base en place et le faire pivoter dans le sens des aiguilles d’une montre jusqu’à ce qu’il s’enclenche en position verrouillée. 4. Replacer le filtre dans le purificateur d’air avec l’autocollant du filtre BISSELL® authentique vers le haut. 2. Enlever le couvercle de la base pour accéder au filtre et le retirer. 1.
Instructions de sécurité AVERTISSEMENT POUR RÉDUIRE LES RISQUES D’INCENDIE, DE DÉCHARGE ÉLECTRIQUE OU DE BLESSURE : » La pellicule de plastique peut être dangereuse. Pour éviter les risques d’étouffement, tenez-la hors de la portée des enfants. » Ne branchez pas votre appareil purificateur d'air AVANT de vous être familiarisé avec toutes les instructions et toutes les procédures d’utilisation.
Bienvenue chez BISSELL®
Série 3139