Tus neeg siv phau ntawv

8 BISSELL.com
Using the Clean Out Cycle
Emptying the Dirty Water Tank
Note: Empty dirty water tank before beginning and be sure the strainer and filter stay dry. Use the
Clean Out Cycle after each use.
1. Fill clean tank with water and
formula up to the Clean Out
fill line. Optional: With the unit
removed from the tray, add
2 fluid ounces of FreshStart™
formula to the Clean Out Tray.
2. Plug machine into a
properly grounded outlet and
place on the tray. The Clean
Out Cycle button on the handle
will light up blue when ready.
3. Press the Clean Out Cycle
button to begin. Note: For best
results, never run the cycle
more than twice.
1. Press the button on the top
of dirty water tank, grab the
front handle and pull out.
2. Hold top of tank near the
sides of the filter and pull up to
remove. Pull strainer stem and
remove from the tank. Throw
debris into the trash.
3. Pour dirty water into a
utility sink or similar waste-
water receptacle. Thoroughly
rinse the tank.
WARNING To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.