Operating instructions

OSnap the Telescoping ExtensionWand, CreviceTool,
and Combination Tool into storage cliPSas shown
On Board TurboBrushce Select Models Ony)
TheTurboBrush Bracket slides onto the Hangeron
the front of the Hanme. Attach the Bracket by
a!igmng the slots Withthe rectangu,ar uar[ on me
Hanger as ShOWnaria pumng down until it is locked
nw place.
Nots: If you do not wish to store the TurhoBrash
on your Lift-Off vacuum, the flrackst lay be
hwlg on a wall for storage aed the llaegsr may
he removed from the vacaam.
Place the TurboBrush in the Bracket by m_gning
the small holes near the brUShroll Wlmme lads
at me bottom of the Bracket arts snaE the TurboBrush
Into place.
CreviceTool//'
,, Combination
0
I_ " _ r
ThePowerSwitchis locatedjust belowthe handle
onthe frontof the DetachableCanister,Pushthe
rockerswitch "ON==(I)to vacuum,and"OFF"(0)
TheBrushSwitch is locatedjust belowthe handle
onthe frontof the DetachableCanisternextto
the PowerSwitch.Thisswitchturnsthe Rotating
Brushonandoff. TI_eBrushSwitchshouldbein
the "ON"(I)positionfor normalcarpetcleaning.
Youmaywantto turn the BrushSwitch"OFF"(0)
for barefloorcleaningorotherdelicatesurfaces,
Nots: Your BISSELLLift-Off I/svolution vacuam
is sqaippsd with a special intsmal switch that
turns the !lotating 13rushoff whenevst the anit is
in the Uprightposition.
CAUTION:
Before using yoar vacuum, make
sure that the Dirt Ooetaiesr and
Upper Tankate in locked position
and that all filters (tlppsr Tank,
Prs=Mator and Post=Motor) ate
ie place, Do not operate yaar
vacuum without thsss filters.
Brush
Upright- Forstoragearia abovefloor cleaningwith tools.
Normal Cleaning - Press me Hanme Release Pedal
with your foot to recline
Power