USER'S GUIDE 44L6 SERIES 220-240V 2 Thank You 3 Safety Instructions 4 Product View 5 Assembly 6-11 Operations 12 Maintenance and Care 13 Troubleshooting 14 Replacement Parts 14 Accessories 15 Warranty 16 Consumer Care
Thanks for buying a BISSELL PowerWash™ PowerBrush Select Deep Cleaner We’re glad you purchased a BISSELL PowerWash PowerBrush Select deep cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your BISSELL PowerWash PowerBrush Select deep cleaner is well made, and we back it with a limited two-year warranty.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: ■ Remove plug from electrical outlet before cleaning or maintaining the appliance ■ Not intended for use by persons (including Read all instructions before using your deep cleaner. Always connect to a properly Earthed outlet. Unplug from outlet when not in use and before conducting maintenance or troubleshooting.
Product view Ergonomically Designed Handle™ Quick Release™ Cord Wrap WARNING: To reduce the risk of fire and electric Handle Assembly shock due to internal component damage,use only BISSELL cleaning formulas intended for use with the deep cleaner. Non-BISSELL cleaning formulas may harm the machine and void the warranty.
Assembly Your PowerWash PowerBrush Select deep cleaner comes in five easy to assemble components: • Handle assembly • Upper body assembly • Upper hose rack • Lower body assembly • Lower hose rack Three Phillips head screws are included and can be found taped to the handle assembly. The only tool you will need to assemble your cleaner is a Phillips head screwdriver. 1. Slide upper body assembly onto lower body and secure with two screws. 2.
Operations Special features DirtLifter™ Powerbrush The DirtLifter PowerBrush is designed to enhance cleaning performance. The bristle pattern safely lifts out the deep down dirt while gently grooming carpet fibers. The floating suspension self-adjusts to all carpet heights. When the power is ON and the machine is in the upright position, your carpet is protected because the brushes are lifted up off the carpet.
Operations Before you clean 1. Plan activities to give your carpet time to dry. 2. Move furniture to another area if cleaning an entire room (optional). 3. Vacuum area with a dry vacuum cleaner before deep cleaning. EXIT 4. Plan your cleaning route to leave an exit path. It is best to begin cleaning in the corner farthest from your exit. 12 5 9 10 11 6 7 2 5.
Operations Fill the 2-in-1 water tank (cont) 5. Replace the top of the tank by matching the lid and tank edges. Handle must be in the forward position in order to replace lid. Rotate the handle to the carrying position to latch the lid. 6. 5. Note: Remember to secure the lid and test to make sure it is secure before picking up the tank. 6. Place tank into machine base, seating firmly in place. Rotate tank handle back into latched position. Carpet cleaning 1. Plug the deep cleaner into a proper outlet.
Operations Empty the 2-in-1 water tank (cont) 2. Empty collection water from bottom of tank. 3. After each use, remove and rinse the lint screen located on the tank lid. 4. If nozzle needs to be cleaned, remove by grasping handle at the top and pulling forward. Clean removable nozzle by rinsing under running water. 5. 2. 3. Lint Screen 4. When finished, replace nozzle by slightly raising front of machine to line up slots on the base with the hooks on nozzle.
Operations ReadyTools™ (cont) 6. To begin cleaning with attachments, follow the instructions on pages 7-8 for filling the 2-in-1 water tank. 7. Set the ReadyTools dial to the TOOLS setting. This will allow spray and suction from the hose. 8. Attach the cleaning tool to the end of the hose. 9. Clean by pressing the spray trigger to spray solution onto the area to be cleaned. Slowly move the tool back and forth over the soiled surface. Release the spray trigger to suction dirty water.
Operations Hard Floor Cleaning Your PowerWash PowerBrush Select deep cleaner may have included a hard floor tool and Hard Floor Solutions. The hard floor tool provides effective cleaning for linoleum, vinyl, and tile floors. Caution: Do not use on unsealed hardwood floors. 1. Thoroughly vacuum or sweep floor to pick up any debris. NOTE: Prior to filling with formula and water be sure all carpet cleaning formula is thoroughly rinsed from the 2-in-1 water tank. 2.
Maintenance and care Machine care For best results, a few simple steps can assure your machine is well maintained after your cleaning is complete. 1. Turn power switch OFF. Unplug the machine and wrap the power cord. 2. After emptying the 2-in-1 water tank, rinse it with running hot tap water, taking care to clean underneath and around the heavy duty bladder. Clean out red lint screen. Removable nozzle may be rinsed if necessary. Refer to page 9. 3. Replace the 2-in-1 water tank on the machine. 4.
Troubleshooting Reduced Spray OR No Spray Possible causes WARNING: To reduce the risk of fire, electric shock or injury, unplug from the outlet before servicing. Remedies 1. Bladder may be empty. 1. Turn power switch OFF; Refill bladder with clean hot tap water. 2. 2-in-1 tank may not be seated properly. 2. Turn power switch OFF; remove tank and reseat tanks. 3. Pump may have lost prime. 3. Turn power switch OFF; after 1 minute turn ON and depress spray trigger. 4. A.
Replacement parts Item 1 2 3 4 5 6 Part No. Part Name 203-0104 203-0102 203-8114 215-0628 015-0621 203-0105 Tank Assembly Complete Tank Base Removable Nozzle Replacement Pump Belt (with instructions) Replacement Brush Belt (with instructions) Lint Screen 1 2 3 5 4 6 Accessories While not all of these parts may not have come with your machine, all are available to you for purchase, if desired. Item 1 2 3 4 5 6 7 8 Part No.
Warranty This warranty gives you specific legal rights, and you may also have other rights which may vary from country to country. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Care by E-mail, telephone, regular mail as described below, or contact your local in country distributor.
BISSELL consumer care If your BISSELL product should require service: Call BISSELL Consumer Care at the numbers below and we will give you the location of a BISSELL Authorized Service Center in your area. If you have questions about your warranty or need replacement parts please contact the numbers below.