Quick Start Guide

ManualsBrandsBissell ManualsAppliances47A23 ProHeat 2X® Premier Carpet Deep Cleaner

BISSELL is happy to be of service.

visit the website for helpful instructions at

www.bissell.com

Quick Start

Guide

PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE

PLEASE KEEP FOR FUTURE REFERENCE

BISSELL Homecare, Inc.

P.O. Box 1888

Grand Rapids, MI 49501

Phillips head screw driver is needed for assembly

*Color and pack-ins vary by model

Package contents:

Carpet cleaning

Cleaning with attachments

1. While pressing the trigger, make one slow forward

wet pass and another one back

2. Release the trigger and make one slow forward

and backward pass over the same area. Repeated

passes will help aid in dry time

3. Continue passes until cleaning area is complete

4. When the dirty water reaches the “FULL” line on the tank,

it is time to empty

5. Empty dirty water by removing tank from base of machine. Carry to sink

or outside to dispose of water. Unlatch top of tank and pour dirty water

through rectangle shaped opening in corner

6. Rell as needed, following steps 4 & 5 under "Before you begin cleaning"

1. Make sure handle of machine is locked in upright position

2. Attach the cleaning tool to the end of the hose

3. Clean by pressing the trigger to spray solution onto the area to be cleaned

4. Slowly scrub the tool back and forth over the soiled surface

5. Tilt the tool forward and release spray trigger to suction liquid

WARNING:

Refer to the enclosed user guide for complete

instructions and important safety notices.

Refer to the User’s Guide for full instructions on how to clean, store and maintain your machine

For additional tips and troubleshooting

Please refer to User's Guide

Visit: www.bissell.com

160-1426

6.5.

d. e.

Machine Base & Tank-in-Tank System

b. Upper Handle

c. 3 Screws – taped to handle

d. Upper Hose Rack

e. Measuring Cup

f. 3" Tough Stain Tool*

g. Trial-Size Formula*

a. b. c.

Summary of content (4 pages)

PAGE 1
Carpet cleaning 1. While pressing the trigger, make one slow forward wet pass and another one back TM 2. Release the trigger and make one slow forward and backward pass over the same area. Repeated passes will help aid in dry time BISSELL is happy to be of service. Contact us directly at 1-800-237-7691 or visit the website for helpful instructions at www.bissell.com 3. Continue passes until cleaning area is complete 4.
PAGE 2
Assembly Before you begin cleaning 1. Slide upper handle onto machine base 1. Move furniture to another area if cleaning an entire room 2. Screw 2 screws into the marked holes 2. Remove large dirt and debris from carpet (See User's Guide for more details) 3. Place upper hose rack onto back of upper handle, and secure with screw 3. Pre-treat spots & stains and heavy traffic areas (optional – see User's Guide) 4. Wrap power cord to the left and flex hose to the right of the upper hose rack 4.
PAGE 3
Limpieza de alfombras 1. Mientras presiona el gatillo, haga una pasada lenta hacia adelante y otra hacia atrás. 2. Suelte el gatillo y haga una pasada lenta hacia adelante y atrás sobre la misma área. Las pasadas repetidas ayudarán con el tiempo de secado. 3. Siga haciendo pasadas hasta completar la limpieza del área. 4. Cuando el agua sucia llegue a la línea “FULL” (lleno) del tanque, es hora de vaciarlo. 5. Retire el tanque de la base de la máquina para desechar el agua sucia.
PAGE 4
Armado Antes de limpiar 1. Deslice el mango superior en la base de la máquina. 2. Sujete con dos tornillos en los agujeros marcados. 3. Acople el soporte superior de las herramientas (solo en ciertos modelos) al mango superior haciendo encajar a presión la parte inferior primero y luego la superior. 4. Coloque el soporte superior de la manguera en la parte trasera del mango superior y sujete con tornillo. 5.