User Guide

Trbleshting
WARNING
To reduce the risk of electric shock, turn power switch o
and disconnect polarized plug from electrical outlet before
performing maintenance or troubleshooting checks.
Problem Possible causes Remedies
Vacuum
won’t turn on
Battery isn’t fully charged Charge battery. Follow charging
battery instructions on page 5
Brush roll
not turning
Brush roll is jammed Remove obstruction.
Follow instructions on page 7
Brush roll needs to be reset Follow instructions on page 7
Broken brush roll belt Follow instructions on page 8
Vacuum
cleaner
has low
suction
Dirt container is full Empty dirt container
Dirt container is not installed
properly
Position container correctly and
snap firmly into place
Foot is loose Make sure foot is fully inserted into
body of unit
Filters need cleaning Follow filter instructions on page 7
Filters need replacing Visit www.bissell.com or call 1-800-
237-7691 to order replacement filters
Visible dirt
escaping from
cleaner
Dirt container is full of debris Empty dirt container
Filter is missing or installed
incorrectly
Check filter for correct installation
Dirt container installed incorrectly Position container correctly and
snap firmly into place
www.BISSELL.com
800.237.7691
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.
For any questions or concerns, BISSELL is happy to
be of service. Contact us directly at 1-800-237-7691.
Please do
not return
this product
t o t h e s t o r e .
9