USER'S GUIDE 57F4 SERIES 220-240V 2 Thank You 3 Safety Instructions 4 Product View 5 Assembly 6-8 9 Operations Maintenance and Care 10 Troubleshooting 10 Replacement Parts 10 Additional Accessories 11 Warranty 12 Consumer Services
Thanks for buying a BISSELL Steam & Sweep We’re glad you purchased a BISSELL Steam & Sweep. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your Steam & Sweep is well made, and we back it with a limited two year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: Read all instructions before using Steam & Sweep. Always connect to a properly Earthed outlet. Unplug from outlet when not in use and before conducting maintenance or troubleshooting.
Product view Handle Power Cord Brush Switch Quick Release™ Cord Wrap Power Switch Water Tank Filter Ready Light Dirt Bin Release Pedal Maneuverable Swivel Head Mop Pad 4 w w w. b i s s e l l .
Assembly Your Steam & Sweep assembles quickly and easily. The only tool you will need for assembly is a Phillips head screwdriver. Your Steam & Sweep is packaged with the following items: Handle Assembly Lower Body with Water Purification System Maneuverable Swivel Head Removable Water Tank 1 large Phillips Head Screw 1 small Phillips Head Screw 2 Mop Pads Attach handle to Steam & Sweep 1.
Operations Special Features Removable water tank The water tank is located on the back of the Steam & Sweep. It can be refilled with water any time during use. Distilled or demineralized water is recommended in place of tap water. Do not use chemicals with your Steam & Sweep. Water purification system This filter removes minerals and other impurities from tap water, preventing water deposits from damaging your Steam & Sweep. It should be replaced when the bright green grains turn blue.
Operations Getting ready continued D. Replace the insert assembly and cap, tighten until snug. 2D. 2E. E. Replace the water tank by lining up the vertical guides and gently sliding it back into place. 3. Twist the quick release cord wrap clockwise to unwrap the power cord completely, make sure both switches are in the OFF position and plug it into a proper outlet. 4. Turn power button on. The ready light will illuminate when the Steam & Sweep is ready for use.
Operations Steam cleaning hard floors Your Steam & Sweep is designed to clean hard flooring such as ceramic tile, vinyl, marble, stone and sealed hard wood floors. Use of your Steam & Sweep on waxed or some unwaxed floors may result in a diminished glossiness. The Steam & Sweep is not for use on unsealed wood floors. Ensure that the Steam & Sweep is throughly tested in an inconspicuous area prior to cleaning a large floor area. Also be sure to check the care instructions from your flooring manufacturer. 1.
Maintenance and care When you’re done 1. Make sure both power switches are in the OFF position. Unplug power cord from outlet. 2. Carefully remove mop pad from swivel head, as mop pad and lower assembly will be hot. 3. Any water remaining in the water tank should be emptied prior to machine storage. 4. Mop pad can be machine washed in warm water with mild detergent. Do not use bleach or fabric softeners. For best results, air dry. 5. Wrap power cord around quick release cord wrap on side of Steam & Sweep.
Troubleshooting Reduced steam or no steam Possible causes Remedies 1. Water tank is empty 1. Fill water tank 2. Depleted water filter 2. Replace filter 3. Blocked steam nozzle 3. Refer to NOTE in the middle of page 9. Other maintenance or service not included in the manual should be performed by an authorized service representative. Thank you for selecting a BISSELL product. NOTE: There are no serviceable parts in the upper housing of this product. Please do not return this product to the store.
Warranty - BISSELL Steam & Sweep This warranty gives you specific legal rights, and you may also have other rights which may vary from country to country. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by E-mail, telephone, regular mail as described below, or contact your local in country distributor.
BISSELL consumer services If your BISSELL product should require service: Call BISSELL Consumer Services at the numbers below and we will give you the location of a BISSELL Authorized Service Center in your area. If you have questions about your warranty or need replacement parts please contact the numbers below. For UK inquiries: Monday - Thursday Friday 9 am — 5 pm 9 am — 4 pm BISSELL Homecare (Overseas) Inc. Ground Floor 226 Berwick Avenue Slough Berkshire, SL1 4QT United Kingdom Telephone: 0844.888.