PowerForce® B A G L E S S USER’S GUIDE 6582 SERIES 3 Safety Instructions 4 Product View 5 Assembly 6-7 Operation 8-12 Maintenance and Care 13-14 Troubleshooting 14 Consumer Services 15 Replacement Parts 16 Warranty ug110_4018_6582_1107.
Thank you for buying a BISSELL PowerForce® Bagless Vacuum We’re glad you purchased a BISSELL PowerForce Bagless Vacuum. Everything we know about floor care went into the design and construction of this powerful, high-tech home vacuuming system. Your BISSELL PowerForce Bagless is well made, and we back it with a limited one year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services Department, so, should you ever have a problem, you’ll receive fast, considerate assistance.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: READ ALL INSTRUCTIONS BEFORE USING YOUR UPRIGHT VACUUM. Always connect to a polarized outlet (left slot is wider than right). Unplug from outlet when not in use and before conducting maintenance. WARNING: To reduce the risk of fire, electric shock, or injury: ■ Do not modify the polarized plug to fit a non-polarized outlet or extension cord.
Product view Cord Clip Hose Clip Stretch Hose Handle Crevice Tool Carrying Handle Extension Wand Quick Release™ Cord Wrap Power Cord Primary Separator Reach® Quick Handle Combination Dusting Brush/ Upholstery Tool Hose Wand Power Switch Hose Wand Base Upper Tank Dirt Container Filter Cup Inner and Outer Circular Filters Lock ’n Seal™ Lever Post-Motor Filter Handle Release Pedal Height Adjustment Knob Foot Hose CAUTION: Do not plug in your Powerfoot Furniture Protection Guard vacuum cleaner un
How to use this guide This User’s Guide has been designed to help you get the most satisfaction from your BISSELL PowerForce Bagless. You’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this Guide thoroughly before assembling your vacuum cleaner. Pay particular attention to the product diagram, assembly instructions, and part names. Locate and organize all parts before assembly.
Operation Handle position Press the handle release pedal with your foot to place your BISSELL PowerForce Bagless into one of three cleaning positions. 1. Upright- For storage and above floor cleaning with special tools. 2. Normal Cleaning- Press handle release pedal once. Use for most household floor cleaning tasks. 3. Low Cleaning- With the vacuum in normal cleaning position press handle release pedal again. Use for reaching under low furniture such as tables, chairs and beds.
Operation Special tools Your BISSELL PowerForce Bagless is not only a powerful carpet and rug vacuum cleaner, it’s also a versatile above floor vacuum cleaner when you select one of the special tools. 1. Raise handle to upright position. 2. Grasp the quick reach handle and lift hose wand to separate from suction intake opening. 3. Attach tools by firmly pushing onto vacuum hose or extension wand.
Maintenance and care To maintain maximum cleaning performance from your BISSELL PowerForce Bagless, perform these simple maintenance steps. 1. Empty the dirt container when the dirt reaches the “Full” line on the side. 2. Check the inner and outer circular filters, and the pre-motor filter at least once a month and clean or replace as needed. 3. Clean or replace the post-motor filter every three to six months.
Maintenance and care Cleaning the inner & outer circular filters Use only BISSELL Style 10 replacement filters in your BISSELL PowerForce Bagless. 1. Unplug the cleaner from electrical outlet. 2. Remove the dirt container as described in the previous section. Grasp the filter cup located at the bottom of the dirt container and twist counterclockwise to unlock and remove. 3. Grasp the circular filters and pull straight up to remove. 4. Separate the outer foam and inner pleated circular filters.
Maintenance and care Cleaning post-motor filter Use only BISSELL Style 10 replacement filters in your BISSELL PowerForce Bagless. 1. Unplug the cleaner from electrical outlet. 2. The post-motor filter assists in the filtration process to return clean air to the room. It is located behind the door on the front of the cleaner. When the filter becomes dirty, open the door, remove the filter and clean. 3. The post-motor filter may be hand washed in warm water. Mild detergent may be used if desired.
Maintenance and care Replace drive belt Use only BISSELL Style 10 Replacement Belts (#32074) in your BISSELL PowerForce Bagless. 1. Unplug cleaner from electrical outlet. 2. With rotating floor brush removed from vacuum cleaner (Steps 1-4 of Check rotating floor brush and drive belt), grasp old drive belt and remove from motor pulley. Discard old drive belt. 3. Place new drive belt over motor pulley and stretch other end over rotating floor brush in the space between the bristles. 4.
Maintenance and care Clearing clog Low suction, poor pickup, or no suction may be due to a clog in the vacuum cleaner. If you notice a change in the sound of the vacuum motor or a reduction in the spinning action in the dirt container, check for clogs. 1. Unplug cleaner from electrical outlet. 2. Empty dirt container. 3. Check upper tank and primary separator for build up or clogs. Check to make sure primary separator is installed correctly.
Troubleshooting WARNING: To reduce the risk of electric shock, turn power OFF and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting. Vacuum cleaner won’t turn Possible causes Remedies 1. Power cord not firmly plugged in 1. Check electrical plug 2. Blown fuse/tripped breaker 2. Check/replace fuse or reset breaker. Vacuum cleaner won't pick up dirt Possible causes Remedies 1. Incorrect height adjustment 1.
Troubleshooting Visible dirt escaping from cleaner Possible causes Remedies 1. Dirt container full 1. Empty dirt container 2. Filters missing or installed incorrectly 2. Check inner and outer circular filter and post-motor filter for correct installation 3. Dirt container installed incorrectly 3. Pull out and re-insert dirt container correctly 4. Filter cup installed incorrectly 4.
Replacement parts - BISSELL PowerForce Bagless You may purchase parts from your retailer, by calling BISSELL Consumer Services or by visiting our website. Below is a list of common replacement parts. While not all of these parts may have come with your specific model, they are available for purchase if desired. Item Part No.
Warranty This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below. Limited One Year Warranty Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL Homecare, Inc.
