User Guide

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Operations
8
Variable suction power control
The variable suction power control is
located on the back of the vacuum.
Turn the control toward the larger
dots for maximum suction. Turn the
control toward the smaller dots to
minimize suction for lightly soiled
areas or delicate fabrics.
Air flow regulator
Open the air flow regulator by
sliding the regulator back towards
the handle to an open position to
reduce suction for delicate fabrics.
Close the air flow regulator by sliding
the regulator down to the closed
position for full suction.
Clean filter indicator
The clean filter indicator is located
between the power button and the
automatic cord rewind button. It will
monitor your air flow and let you
know when it is time to clean or
replace your filters. If the indicator turns
orange while you are vacuuming, your
filters need to be cleaned or replaced.
If the indicator remains orange, even
after cleaning or replacing your filters,
turn the vacuum off and check for a
clog in the hose or tools.
Note: The indicator may turn
orange when using the tools due
to the restricted airflow. This does
not necessarily mean that the
filters need to be cleaned or
replaced. If the indicator does not
turn off once the tool is removed,
check for a clog in the hose/tools
or clean or replace your filters.
Clean Filter Indicator