User Guide

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
9
Maintenance and care
Emptying the dirt cup
1. Turn vacuum OFF ( ). Unplug the
vacuum from electrical outlet.
2. Open the dirt cup compartment by
lifting up the door latch on the front of
the vacuum.
3. Lift the dirt cup assembly out from the
vacuum.
4. Remove the top cover from the dirt cup
assembly by unfastening the latch,
raising the front edge and removing the
top cover from of the rear hinges. Set the
top cover aside.
5. Empty the dirt into a garbage container.
6. To reattach the top cover on the dirt
cup, align the slots on the top cover
with the hinges on the dirt cup and
rotate the front cover down to the closed
position. Then fasten the latch.
7. Place the dirt cup back into the vacuum.
8. Close dirt cup compartment door and
press down gently until it locks into place.
NOTE: The compartment door will
not close without the dirt cup in place.
2.
4a.
4b.
6.
WARNING:
To reduce the risk of electric
shock, turn power switch
OFF and disconnect plug
from electrical outlet before
performing maintenance or
troubleshooting checks.